FE 701 Enduro 2016-2020
Available categories
Matching articles
Factory Links steering head bearing kit Husqvarna/KTM/Husaberg
ContainsDust Seals x3, O ring x1, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered Roller bearings NBR Race Dust Seals
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
Factory Links wheel bearing set
Bearing set for rear wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights black (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights titanium (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights red (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights titanium (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your wishes. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro Curve-Blast handlebar weights black (pair)
HIGHSIDER CURVE-BLAST handlebar weights - Finely bead-blasted surface in black satin finish - Handlebar weights made of black aluminum with black coated central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions Handlebar weight: Diameter: 35.5 mm Width: 17 mm Mount for mirror: Diameter: 29.8 mm Width: 12 mm Weight with attachments: 74 g Thread M6 x 1.25 mm Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 1 pair, contains: 2 x handlebar weights each. 2 x clamping sleeves D. 12 mm and D. 16 mm each. 2 x centering sleeves each type 1, type 2, type 3. 2 x each black-coated M6 central bolt, toothed washer and M6 conical nut
HIGHSIDER pro Dot handlebar weights black (pair)
HIGHSIDER handlebar weights DOT, chrome-plated or blackHandlebar weights made of chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weight: Diameter: 35.5 mmWidth: 17 mmMirror mount:Diameter: 29.8 mmWidth: 12 mmWeight with mounting parts: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair: 2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves type 1, type 2, type 3 each.2 x central bolt M6, lock washer and cone nut M6 each.Note:Spare mounting kit: 161-034
HIGHSIDER pro Dot-Blast handlebar weights black (pair)
HIGHSIDER DOT-BLAST handlebar weights- surface finely bead-blasted in black satin finish -Handlebar weights made of black aluminum with black-coated central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.DimensionsHandlebar weight:Diameter: 35.5 mmWidth: 17 mmMirror mount:Diameter: 29.8 mmWidth: 12 mmWeight with attachments: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair, includes:2 x handlebar weights2 x clamping sleeves D. 12 mm and D. 16 mm2 x centering sleeves type 1, type 2, type 32 x central bolt black coated M6, lock washer and conical nut M6
HIGHSIDER pro Enterprise handlebar weights gold (pair)
HIGHSIDER ENTERPRISE-EP1 handlebar weightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. The perfect mount for all HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamping. The handlebar weights can of course also be used without a handlebar end mirror and can be adapted to the look of your bike, for example with one of the optionally available color rings. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Handlebar weightDiameter: 34.5 mm Width: 14.5 mmMirror mountDiameter: 29.8 mmWidth: 12 mmScope of delivery:2 x handlebar weights2 clamping sleeves each with 12 and 16 mm Ø2 spacer sleeves each with 14, 18 and 21 mm Ø2 x M6 central bolt2 x M6 cone nutOptional order:Color ring for handlebar weights (see accessories)Note:Please check the dimensions for accuracy of fit before purchasing
HIGHSIDER pro Esagano-LS handlebar weights black (pair)
HIGHSIDER ESAGANO-LS motorcycle handlebar weights Steep and flat trapezoids form the basic shape of the CNC-machined aluminum HIGHSIDER ESAGANO-LS handlebar ends and create a futuristic design that symbolizes the design language of modern motorcycles. A visual highlight is the cover, into which the basic hexagonal shape of our ESAGANO-RS mirror series is CNC-machined. This gives the handlebar ends a closed appearance, free of screw heads. The cover is attached using a grub screw in the non-visible area of the base housing. The ESAGANO-LS handlebar ends are suitable for mounting our comprehensive range of handlebar end mirrors with a stem width of 12 mm. You too can find the perfect mirror for your bike. Our high-quality aluminum sleeve system, which is included in the scope of delivery, allows the handlebar ends to be friction-locked to a variety of handlebars with different inner diameters. Dimensions: Handlebar weight Ø: 40 mm Width: 27 mm Mounting for mirror Ø: 29.90 mm Mounting for mirror width: 12 mm Scope of delivery: 1 pair of handlebar ends incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Esagano-XS handlebar weights black (pair)
HIGHSIDER ESAGANO-XS motorcycle handlebar weights Steep and flat trapezoids form the basic shape of the CNC-machined aluminum HIGHSIDER ESAGANO-XS handlebar ends and create a futuristic design that symbolizes the design language of modern motorcycles. A visual highlight is the cover, into which the basic hexagonal shape of our ESAGANO-RS mirror series is CNC-machined. This gives the handlebar ends a closed appearance, free of screw heads. The cover is attached using a grub screw in the non-visible area of the base housing. Our high-quality aluminum sleeve system, which is included in the scope of delivery, allows the handlebar ends to be friction-locked to a wide range of handlebars with different inner diameters. Dimensions: Handlebar weight: Ø 40 mm Width: 15 mm Scope of delivery: 1 pair of handlebar ends incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Evo handlebar weights
HIGHSIDER EVO bar ends, chrome-plated or black. Chrome-plated or black bar ends, suitable for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All our bar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the Bar End Weights. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your bike. With the highest level of quality and functionality, you can easily customize your bike to your liking. Dimensions: Diameter: 35.5 mm Length: 28 mm Specifications: Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 1 set, including mounting set and universal clamping system: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x central screw M6, toothed washer and conical nut M6. Note: Spare mounting kit: 1107882 (161-034)
HIGHSIDER pro handlebar mirror Conero Black (1pc)
HIGHSIDER CONERO mirror, E-approved, in 2 versions.- BLACK EDITION - The all-black edition for those who like to see in black.- Black anodized version with silver accents -Elegant, CNC-milled universal mirror with a round head made of anodized aluminium in black or matt black. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. The slightly tinted and curved mirror glass offers optimum glare protection. Can be used for left and right side.Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. This is prudence in perfection.A/B Ø head: 98 mmC Total width: 170 mmD Total height: 175 mmStem length: 159 mm to the joint, then another 27 mm to the threaded boltScope of delivery: 1 piece incl.1 x M10 x 1.25 mm right-hand thread adapter1 x M10 x 1.5 mm right-hand thread adapter1 x M10 x 1.25 mm left-hand thread adapterFurther accessories from the HIGHSIDER CONERO seriesYour bike - your project: Design your naked bike with our HIGHSIDER CONERO products to create an individual highlight - expressive, rich in contrast and perfect in form!