Scout 2015-2023 (M)
Available categories
Matching articles
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
HIGHSIDER Pro Apollo Bullet LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO BULLET LED indicators, for front and rear E-approved. Power LED blinker in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 22 mmB: 34 mmD: 40 mm Threaded bolt M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = blinker (+) Scope of delivery: 1 pair Note: E-approved for front and rear. Can be ordered as an option:HIGHSIDER Rear light/indicator APOLLO BULLET, article no. 254-171HIGHSIDER Indicator/position light APOLLO BULLET, article no. 204-173
HIGHSIDER Pro Apollo Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro relay electronics, two-channel, 6-14V
HIGHSIDER Electronic two-channel relay 6-14V(Even more functions than the predecessor HIGHSIDER Plus - Minus Converter CB3)It is possible to control the desired function via both plus and minus. An electronic, dual relay with inputs for all standard pushbuttons or switches.If one of the two inputs is connected to earth or plus via a switch, the corresponding 12 V output is switched on. The outputs can supply lines up to 40 W in continuous operation. Typical power consumers that are operated via non-latching buttons (e.g. horn, low beam, high beam, etc.) can be controlled with the HIGHSIDER two-channel relay. The use of the relay instead of a direct connection of the load to the switch enables the use of the smallest cable cross-sections and push-buttons with low current values. Example 1: You want to use a small push-button with a low flow current to switch a horn (high current consumption), for example. To prevent the button from being damaged by the normal power consumption, simply use this electronic relay.It allows you to use switches or buttons to switch high currents.Example 2:On some motorcycles (e.g. INDIAN), the blinker signal is switched to ground. This means: With the help of the electronic two-channel relay, you can now convert the grounded blinker signal to positive. This means that all indicators, indicator/tail light combinations or indicators/position lights can still be used.(To convert to an indicator/tail light combination (e.g. 254-540) you need 1 x the electronic relay for your vehicle)Product advantages:- Extremely thin cable cross-sections for connecting the buttons- Use of switches for low currents despite consumers with high currents- Extends the service life of switches- 2 independent channels- Very small dimensions and low weight Very small dimensions and low weight- Fully sealed product (waterproof)- Smaller and more flexible than expensive multi-channel switch boxes- Protection against all possible wiring errors- More flexible than - ALL IN ONE SMART BOXES -Dimensions:Width: 17 mmDepth: 9.5 mmHeight: 17 mmWeight: 9 gConnections:Red (thick) = ignition plus 12V (+)Yellow (thick) = work output CH2 (+)Blue (thick) = work output CH1 (+)Yellow (thin) = activation plus signal CH2Blue (thin) = activation plus signal CH1Yellow/black (thin) = activation minus signal CH2Blue/black (thin) = activation minus signal CH1Maximum power: 40 wattsScope of delivery: 1 piece
HIGHSIDER Pro Rocket Classic LED Indicator housing chrome / lens smoke gray (pair), front & rear
HIGHSIDER ROCKET CLASSIC LED blinker, for front and rear E-approvedThe striking variant of the HIGHSIDER ROCKET BULLET model. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The soft, round shape supports the classic associations evoked in the viewer.With this innovative lighting technology, 6 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 45 mm B Width: 67 mmC Depth: 70 mm Stem length: 24 mmMounting bolt: M8, length 25 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pair
LSL brake lever BOW R52R black for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R52R black, short for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R52R silver for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R52R silver, short for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L55R black for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L55R black, short for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L55R silver for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L55R silver, short for Indian Scout ('15-'16)
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which operates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Also fits the following models: Scout Sixty (2016) Info on ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
Tecnium Street Performance sintered metal brake pads - MF429
Sintered metal brake padsExcellent compromise between performance and durability for sporty/performance-oriented operating conditions. MF brake pads at the front (high coefficient of friction) in conjunction with MR brake pads at the rear (medium coefficient of friction) offer an optimum braking balance.
Tecnium Street Performance sintered metal brake pads - MR430
Sintered metal brake padsExcellent compromise between performance and durability for sporty/performance-oriented operating conditions. MF brake pads at the front (high coefficient of friction) in conjunction with MR brake pads at the rear (medium coefficient of friction) offer an optimum braking balance.