Z 125 2018- (BR125K, BR125L)
Available categories
Matching articles
BMC Sport air filter for Kawasaki Z125 (17-)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
Bracket for gear indicator for Kawasaki Z125 (19-) Original
Bracket for gear indicator
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash pads for Kawasaki Z125 (19-) Original
Stylish protective pads that better protect the bike in the "event of a fall". Easy to mount.
HIGHSIDER pro bar end mirror Conero 2 black long (1pc.)
HIGHSIDER CONERO 2 handlebar end mirror, long, E-approvedAvailable in black anodized with polished bevels or the all-black matt BLACK EDITION -CNC-milled handlebar end mirror with a round head made of anodized aluminium. With the second generation of the popular CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch handlebar with the supplied reducing sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right.Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview.Dimensions:A/B Ø head: 98 mmC Total width: 60 mmD Total height: 180 mmHandlebar length center - center: 120 mmScope of delivery: 1 piece, incl.1 x adapter for 7/8 inch1 x adapter for 1 inchNote:Tightening torque for the M4 screw: 3-5 Nm
HIGHSIDER pro bar end mirror Conero 2 black short (1pc.)
HIGHSIDER CONERO 2 handlebar end mirror, short - BLACK EDITION - The all-black edition for those who like to look black. CNC-milled handlebar end mirror with a round head made of anodized aluminium in matt black. The mirror arm is equipped with three stylish air slits and a joint on the clamp provides additional adjustment options for a good view. With the second generation of the popular HIGHSIDER CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch or 22 mm 25.4 mm handlebar with the supplied reduction sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Prudence with style - whether classic or modern. The HIGHSIDER mirror series is characterized by its striking design and aerodynamic function. So you can keep an overview. Dimensions: A/B Head diameter: 98 mm C Total width: 120 mm D Total height: 100 mm Handle length center - center: 85 mm
HIGHSIDER pro bar end mirror Conero Black (1pc)
HIGHSIDER CONERO handlebar end mirror, E-approved CNC-milled handlebar end mirror with a round head made of black anodized aluminium. Combined with polished chamfers, this model stands for a classy, stylish design. Suitable for handlebars with an inner diameter of 12 to 22 mm. In other words, for most 7/8 inch and 1 inch aluminum or steel handlebars. Ideal visibility thanks to curved glass with a slight tint. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Prudence with style - whether classic or modern. The HIGHSIDER mirror series is characterized by its striking design and aerodynamic function. So you can keep an overview. DimensionsTotal width: 60 mmTotal height 180 mmDiameter head: 98 mmStem length center - center: 118 mm
HIGHSIDER pro bar end mirror Esagano-RS black/black long (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, long, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. The handlebar end mirror can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Overall height: 169 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/black short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Total height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/silver short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Overall height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS EVO black/black (1pc)
HIGHSIDER ESAGANO-RS EVO handlebar end mirror, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. Thanks to our tried and tested EVO mounting system, installation is plug and play directly on the handlebars. No additional handlebar weight/accessories are required to mount the mirror on the handlebars! The handlebar end mirror can be mounted both upright and hanging on the handlebars. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Total height: 164 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS EVO black/silver (1 pc.)
HIGHSIDER ESAGANO-RS EVO handlebar end mirror, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. Thanks to our tried and tested EVO mounting system, installation is plug and play directly on the handlebars. No additional handlebar weight/accessories are required to mount the mirror on the handlebars! The handlebar end mirror can be mounted both upright and hanging on the handlebars. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Total height: 164 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Ferrara 2 black short (1pc.)
Discover the HIGHSIDER pro FERRARA 2 SHORT handlebar end mirror - a high-quality accessory for motorcycles. With its sporty design and black, bead-blasted surface, it gives your bike a stylish look.The adjustable arm enables optimum adjustment for a clear view to the rear. Thanks to the convex glass, the mirror offers an extended field of vision and thus reduces the blind spot. It can be easily mounted on most handlebars using the aluminum adapter rings supplied. For even more stable mounting, we recommend using the specially developed HIGHSIDER bar ends. Improve your safety and appearance with the HIGHSIDER FERRARA 2 SHORT handlebar end mirror. Dimensions: A Head width: 122 mm B Height head: 85 mm C Total width: 130 mm D Total height: 150 mm Weight: 196 g Scope of delivery: 1x FERRARA 2 SHORT 1x adapter for 1 inch 1x adapter for 7/8 inch Tip: - Use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Iron Cross Black (1pc)
HIGHSIDER handlebar end mirror in cross design with an aluminum head. Suitable for handlebars with an inner handlebar diameter of 12 to 21 mm, i.e. for most 7/8-inch and 1-inch aluminum or steel handlebars. Can be used for left and right side, E-approved. A question of perspective - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. So you can keep an overview. Dimensions: Width: 105 mm Height: 105 mm Depth: 20 mm Length, arm to joint: 70 mm Length, arm to clamp: 115 mm Width, clamp: 12 mm Scope of delivery: 1 pc. incl. reduction rings for 1 inch and 7/8 inch Note: Use the HIGHSIDER sealing caps to close any holes for mounting the original handlebar mirrors: Article 160-314
HIGHSIDER pro bar end mirror Wave black/black (pair)
HIGHSIDER WAVE handlebar end mirror, E-approvedModern yet classic design with versatile adjustment options.The HIGHSIDER WAVE handlebar end mirrors in silver, black, red or gold complement the look of any motorcycle model. Small color accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC-milled lines of the housing create both a modern and a classic look. The handlebar end mirror has various adjustment options and can be mounted on the motorcycle in different ways. Viewed from the handlebars, it can be mounted pointing upwards or downwards. An adjustable joint allows the mirror arm to swivel sideways towards the clamp and the angle of a ball joint on the mirror housing can be adjusted for optimum rearward visibility. The asymmetrical mirror head can be converted to suit your personal taste and can be rotated by 180 degrees. Suitable for all handlebars with 7/8 inch and 1 inch outer diameter. Our TIP: The handlebar weights from the HIGHSIDER WAVE series are the perfect mount for handlebar end mirrors with external clamps and make the mirrors look even better. The handlebar weights are also available in the same color combinations as the mirrors. Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview. Dimensions:A Head width: 124 mmB Head height: 86 mmC Total width: 175 mmD Total height: 125 mmStem length: approx. 90 mm to the mounting clamp.Weight: 200 gScope of delivery: 1 pair incl. reduction rings for 1 inch and 7/8 inch
HIGHSIDER pro bar end mirror Wave black/silver (pair)
HIGHSIDER WAVE handlebar end mirror, E-approvedModern yet classic design with versatile adjustment options.The HIGHSIDER WAVE handlebar end mirrors in silver, black, red or gold complement the look of any motorcycle model. Small color accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC-milled lines of the housing create both a modern and a classic look. The handlebar end mirror has various adjustment options and can be mounted on the motorcycle in different ways. Viewed from the handlebars, it can be mounted pointing upwards or downwards. An adjustable joint allows the mirror arm to swivel sideways towards the clamp and the angle of a ball joint on the mirror housing can be adjusted for optimum rearward visibility. The asymmetrical mirror head can be converted to suit your personal taste and can be rotated by 180 degrees. Suitable for all handlebars with 7/8 inch and 1 inch outer diameter. Our TIP: The handlebar weights from the HIGHSIDER WAVE series are the perfect mount for handlebar end mirrors with external clamps and make the mirrors look even better. The handlebar weights are also available in the same color combinations as the mirrors. Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview. Dimensions:A Head width: 124 mmB Head height: 86 mmC Total width: 175 mmD Total height: 125 mmStem length: approx. 90 mm to the mounting clamp.Weight: 200 gScope of delivery: 1 pair incl. reduction rings for 1 inch and 7/8 inch
HIGHSIDER pro distance bar black set 25mm
Handlebar spacers for Ø 22.2 mm handlebar diameters available in various colors and heights.Easy to raise the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro distance block silver set 25mm
Handlebar spacers for Ø 22.2mm handlebar diameter available in various colors and heights.Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro handlebar adapter For various Kawasaki models (pair)
HIGHSIDER M8 mounting kit for various Kawasaki motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of Kawasaki motorcycles. The 8 x 1.25 threaded sleeves with M5 internal thread are screwed into the existing thread in the handlebars using a suitable slotted screwdriver. M5 x 30 mm screws are supplied to match the threaded sleeve with M5 internal thread. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever protectors are replaced by the M5 screws The HIGHSIDER handlebar accessories can now be fitted to the Kawasaki handlebars. If necessary, the washers included in the set can be used to create a sufficiently large gap between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Threaded sleeves Outside: M8 x 1.25 Inside: M5 x 30 mm Washer: Outer diameter: 15 mm Inner diameter: 5.3 mm Adapter screw: M5 x 30 mm Spacer washer: Diameter: 28 mm Thickness: 8 mm Hole: 5.3 mm Scope of delivery: 2 x threaded sleeves 2 x washers 2 x M5 screws 2 x spacers Note: Not suitable for handlebar end mirrors with LED indicators
HIGHSIDER pro Handlebar End Mirror Conero Black Short (1pc)
CONERO handlebar end mirror, short adjustable stem, black anodized, combined with polished bevels, suitable for handlebars with an outer diameter of 7/8 inch and 1 inch. The mirror can be used on the left and right, E-approved, one piece. CNC-milled handlebar end mirror with a round head made of black anodized aluminium. Combined with polished bevels, this model stands for a classy, stylish design. The mirror arm is equipped with three stylish air slots and a joint on the clamp provides additional adjustment options for a good view. With the second generation of the popular HIGHSIDER CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch or 22.2 mm 25.4 mm handlebar with the supplied reducing sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview. Dimensions: A/B Ø head: 98 mm C Total width: 120 mm D Total height: 100 mm Handle length center - center: 85 mm Weight: 230 g Scope of delivery: 1 piece, incl. 1 x adapter for 7/8 inch (22.2 mm) 1 x adapter for 1 inch (25.4 mm)