Z 750 /R 2007-2012 (ZR 750 L / M / N)
Available categories
Matching articles
Blinker front left/ rear right for: KAWASAKI Z750 / 1000 '07-08
Dimensions and properties identical to standard component.
Blinker, front right / rear left for: KAWASAKI Z750 '07-08
Dimensions and properties identical to standard component.
Electrosport regulator - Kawasaki
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Electrosport stator
ElectroSport stators are designed as a direct replacement for the original equipment Manufactured for higher power loads Developed in the USA One of the best value for money
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
HIGHSIDER pro 45 mm headlight Dual-Stream LED black E-approved (1pc)
HIGHSIDER DUAL-STREAM LED headlight, black, E-approved The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing and robust bracket. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoid lens and the shutter technology with which a mechanical shutter switches between high and low beam. By using this modern LED technology, the smallest possible housing dimensions can be achieved with the greatest possible light output. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions:Lens diameter: approx. 45 mmHeight: 70.2 mmWidth: 67 mmDepth: 96.5 mmDistance between mounting holes: 67 mmLateral mounting holes: M 5 mmHousing material: aluminumWeight: 0.230 kg Power consumption:12V / 12W, 739.3 lm, low beam12V / 19 W, 739.3 lm, high beam Connections:Position light = brownLow beam = whiteThe white cable is connected to ignition plus (+) High beam = blueGround = green (-)
HIGHSIDER pro 5 3/4 inch headlight insert type 10 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 10 with parking light, E-approved Dimensions:Diameter A = 145 mmDiameter GA = 132 mmDiameter I = 125 mmT = 60 mmR = 10 mmCable length: 210 mm Weight: 658 gConnections: (3 pin plug) Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 11 LED black E-approved (1pc)
HIGHSIDER TYPE 11 7-inch LED main headlight insert, E-approved High beam, low beam, parking light and with TFL (daytime running light) function The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic See and be seen! This is extremely important for motorcyclists. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give your motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, then the LED main headlight is an excellent choice. The built-in LED daytime running light in TYPE 11 is the perfect way to improve visibility during the day. The ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizingly unique look. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight! Dimensions: A diameter = 170 mm GA Diameter = 165 mm I diameter = 160 mm T = 60 mm R = 9 mm Total depth from glass to cooling fins: 96 mm Cable length: 170 mm Connections: Power input: 3 pin connector Black cable = ground (-) White cable = low beam (+) Blue cable = high beam (+) TFL: Black cable = earth (-) Brown cable = daytime running light (+) Gray cable = parking light (+) Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 4 LED E-approved (1pc)
This round, chrome-plated reflector with clear glass has a high beam, low beam, parking light and daytime running light function. The daytime running light and position light are installed in a central strip, creating a very attractive light pattern - the low beam shines above the strip, while the high beam shines below it. The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic - and is E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W Yellow cable = high beam (+), power consumption at 12V: 1.3A, 13W Black cable = ground (-) TFL: Black cable = ground (-) Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W White cable = position light (+), power consumption at 12V: 0.2A, 2.4W Scope of delivery: 1 piece Note 1: - Asymmetrical use, only approved for right-hand traffic. - The enclosed 3-pin standard plug must be fitted by the customer after the reflector has been installed. View of plug contacts: High beam (yellow) = right Low beam (blue) = top Ground (black) = left Note 2: The daytime running light can also be used on vehicles without a light switch. This requires the following components, for example: Switch: Art. No. 240-044 HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER pro 7 inch headlight insert type 8 LED black E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 8- See and be seen! -Of the utmost importance for motorcyclists. The built-in LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light circuit on the vehicle is provided without additional control boxes or switches, complies with regulations and simplifies installation. Modern LED lighting technology has made huge progress in the headlight sector. An LED bend lighting headlight for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlamp with bend lighting offers clear advantages over a conventional headlamp. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Thanks to the improved illumination, you can see more of the bend and what is behind it. The rider can adjust better to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlight is available in black with tinted glass or in chrome with clear glass. The HIGHSIDER LED headlamp with daytime running light, position light and cornering light is of course E-approved. To switch from daytime running light to dipped beam: Press the high beam/flasher button briefly (approx. 1 second) and release the button as soon as the dipped beam is active. The low beam is then permanently active. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight!Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmConnections:Power input: 3-pin plugRed cable = low beam (+)White cable = high beam (+)Black cable = earth (-)Separate cable (round plug):Red cable = LED position light (+)Scope of delivery: 1 pieceNotes:The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. This resistor prevents the parking light error message.This headlight does NOT work in conjunction with the HIGHSIDER E-BOX TYPE 1 (item number: 208-200)
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-X LED rear light black/red E-approved (1pc)
HIGHSIDER AKRON-X LED rear light with red glass, E-approved - State-of-the-art technology in a timelessly elegant look - The timeless but striking design language characterizes the design of the HIGHSIDER AKRON-X rear light. The bead-blasted aluminium housing impresses with its black matt anodization. You can adjust the rear light via the adjustable stem in a range of up to 37° and therefore position it perfectly on your bike. Powerful SMD technology under the dark red glass ensures powerful illumination so that you cannot be overlooked. Be seen with safety - the AKRON-X rear light offers you the safety you need on your bike and the look you want. Our accessory TIP: Visually matching in combination with the products of the AKRON series. The rear light picks up on the design language of the handlebar ends, grips and indicators with its design elements and turns your bike into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. You can customize your bike with the highest level of quality and functionality. Dimensions: A Diameter: 39 mm B Width: 45 mm C Depth: 47 mm Connections: Black cable = ground (-) White cable = rear light (+) Red cable = brake light (+) Scope of delivery: 1 piece, including mounting and connection material
HIGHSIDER pro Apollo Bullet LED rear light, brake light, blinker black/toned 3in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 3in1 LED rear light, brake light, blinker, for rear E-approved. LED rear light, brake light, blinker unit in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Saving the best for last - be seen in safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster Dimensions:A: 22 mmB :34 mmD: 40 mmThreaded bolt: M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+) Scope of delivery: 1 pair