SV 650 2016- (CX, CX123, CX163, CX243, CX124, CX273)
Available categories
Matching articles
Adapter plate for Suzuki SV650 BJ. 2016-2017
Necessary to mount the top case 990D0-B2700-000 to the top case carrier 990D0-18K00-060 WVTA homologation Important - optional accessory Top case carrier - 990D0-18K00-060 Top case - 990D0-B2700-000
BMC Sport air filter for Suzuki SV 650 (17-)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
Bracket for navigation device for Suzuki SV650 BJ. 2007/ SV650 BJ. 2016-2017/ GSF650 BJ. 2007-2008/
Holder for navigation device Delivery without navigation device and without retaining claw, perfectly positioned holder for your navigation device, prepared for e.g. Garmin Zumo and TomTom RIDER (retaining claws belong to the scope of delivery of the navigation devices), adaptation to other holding systems possible.
Brake lever for Suzuki SV650 BJ. 2016-2017
Original brake lever in black finish
Charger Optimate 3+ for Suzuki models Original Suzuki
for various Suzuki models Charger Optimate 3+. For all 12V standard lead/acid batteries as well as gel and microfleece batteries. Optimal range of use 2Ah to 35Ah. Of course, batteries with a larger capacity can also be charged. Only the charging time will be slightly longer.
Clutch lever for Suzuki SV650 BJ. 2016-2017
Original clutch lever in black finish
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
First aid kit incl. high-visibility vest for Suzuki models Original Suzuki
for various Suzuki models First aid kit with high-visibility vest. Contents according to DIN 13167Illustration shows in the foreground 990D0-FST01-AID and in the background 990D0-FST01-KIT incl. high-visibility vest. Important: Please note that first aid kits are mandatory in many European countries. Therefore, check the regulations in the respective country of travel before starting your journey.
Footrests incl. bracket (left side) for Suzuki SV650 BJ. 2016-2017
As a replacement for the original footrests including bracket for the left side.
Footrests incl. bracket (left side) for Suzuki SV650 BJ. 2016-2017
As a replacement for the original footrests including bracket for the left side.
Frame slider for Suzuki SV650 BJ. 2016-2017
Protect your motorcycle and enjoy riding to the fullest with the high-quality frame sliders for the Suzuki SV650 model year 2016-2017. These stylish sliders not only offer optimum protection for the frame and engine area, but also give your SV650 an elegant touch. You will feel safer, whether on the country road or in city traffic. Imagine riding with a reassuring feeling that your motorcycle is well protected. The original Suzuki frame sliders are not only functional, but also a real eye-catcher. They were specially developed for the SV650 and fit perfectly into the lines of your bike. With WVTA homologation, you can be sure that you are getting a tested and high-quality product. Installation is child's play - you don't need any special tools and can fit the sliders yourself. The original Suzuki accessories guarantee the highest quality and a perfect fit. Whether for leisurely cruising or on the racetrack, these sliders are your best companions. Trust in our experience and the satisfaction of many other bikers who have opted for this protection. Get your Frame Slider now and experience riding without compromise. High-quality frame slider with a successful look. Perfectly protects the frame and engine area of your SV650 and blends in perfectly with the line of the motorcycle. WVTA homologation Easy to fit Original Suzuki accessories
Gas cap protector for Suzuki SV650 BJ. 2016-2017/ GSF1250S BJ. 2015-2016
Gas cap protector in carbon look
Gilles clutch lever FXL for Suzuki
Optimal shape for all grip styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
Heel guard for Suzuki SV650 BJ. 2016-2017
Protects the heel pads and the gearshift against wear that can be caused by your shoes. Matte black
HiFlo air filter element for Suzuki SV 650 (17-)
HIFLO air filters are produced from the highest quality materials to give modern high performance engines the best performance: Maximum filtration and perfect airflow !
LeoVince exhaust system GP Duals, stainless steel, slip on for Suzuki SV 650
The GP Duals is the new product line in the slip-on variant of Leovince. Inspired by the "Leovince GP Style", but specifically designed for all those enthusiasts among motorcyclists who are looking for an exclusive product with a distinctive sound and an equally distinctive design for your motorcycle.The GP Duals Exhaust systems are completely made of AISI 304 stainless steel, which guarantees long-lasting durability. Both mufflers are finished with a heat-resistant ceramic-based metallic paint. This guarantees a long resistance to high temperatures. The LeoVince logo, which is applied with the latest laser technology on the opaque ceramic paint, beautifies this new slip-on system. Of course, this system is E-approved and is completely easy to install by means of the laser-made custom-fit brackets. Suitable for the following models:Suzuki SV 650 / ABS (Bj.16-19)Suzuki SV 650 X ABS (Bj.18-19) Weight 3,76 kg (-0,54 kg of the original exhaust system) Approval: ECE-ApprovedThe exhaust system is approved according to the noise directive ECE-R92. In addition, it also complies with EU Directive 134/2014, as the original catalytic converter is retained. Performance Diagarmm:
LeoVince exhaust system SBK LV One Evo 2, stainless steel, slip on for Suzuki SV 650
The new LV ONE EVO SLIP ON in STAINLESS STEEL is the synthesis between tradition and modernity. It offers visually the classic look of LeoVince silencers, but with the highest performance and lightest materials of today. Entirely made of TIG welded AISI 304 stainless steel Flattened oval shape Carbon end cap Carbon retaining clip Manufacturer name lasered directly into the muffler The stainless steel mufflers are glass bead blasted, this gives a nice titanium look Excellent price-performance ratio Weight: 2,50 kg (-1,80 kg of the original exhaust system) Suitable for the following models:Suzuki SV 650 / ABS (Bj.16-19)Suzuki SV 650 X ABS (Bj.18-19) Approval: ECE-ApprovedThe exhaust system is approved according to the noise directive ECE-R92. In addition, it also complies with EU Directive 134/2014, as the original catalytic converter is retained.
LeoVince exhaust system SBK Nero Evo 2, stainless steel, slip on for Suzuki SV 650
The LeoVince NERO Slip On in a modern design with an aggressive look. An outstanding feature of the LV NERO Slip On is the stainless steel outer shell with a special black coating. This coating gives the silencer a strong resistance to high temperatures and mechanical stress. Using modern laser technology, the LeoVince logo was applied to the exhaust. With the LeoVince NERO Slip On the performance of your motorcycle or maxi scooter is optimized and this in compliance with European standards. The end cap features an asymmetrical and aggressive design and is made entirely of two layers of carbon fiber. This noble material reinforces the quality impression of this new exhaust system and represents equally a resistant and visually appealing solution. Suitable for the following models:Suzuki SV 650 / ABS (My.16-19)Suzuki SV 650 X ABS (My.18-19) Weight: 2,74 kg (-1,56 kg of the original exhaust system) Approval: ECE-ApprovedThe exhaust system is approved according to the noise directive ECE-R92. In addition, it also complies with EU Directive 134/2014, as the original catalytic converter is retained.
Lever set for Suzuki GSR600 / GSR750 / GSX-R1000 / SV650 / DL650 V-Strom / SFV650 - Barracuda
The Barracuda levers impress with their perfect workmanship and delicate design. The levers are made of high-quality billet aluminum. They can be individually adjusted in 6 stages. There is a joint at the base of the lever to prevent damage or breakage even if it falls over. The levers are supplied exclusively in black anodized and in pairs. Alternatively, the lever end pieces can be reordered and exchanged in different anodized colors (see "Accessories"). The brake and clutch levers are supplied and have an ABE.