SV 650 /X 2016- (CX)
Available categories
Matching articles
ARROW Zwischenrohr, Edelstahl für Suzuki SV650, ab Modelljahr 2016-
ARROW Zwischenrohr, Edelstahl für Suzuki SV650, ab Modelljahr 2016- ARROW Zwischenrohr, Edelstahl; für Suzuki SV650, Typ WCX0, Modelljahr 2016-2020 SV650, Typ WCX0, Modelljahr 2021-2023 Zur Verwendung mit ARROW-Endschalldämpfer AR-71846 und originalen Krümmer. Produktkennzeichnung: Abgastechnik ARROW Hinweis: Zur Verwendung mit originalen Krümmer und ARROW-Endschalldämpfer AR-71846 Produkt Typ: ARROW Zwischenrohr Suzuki SV650 16- Edelstahl
ATHENA Valve cover gasket - Suzuki
ATHENA : High-performance gaskets to improve engine efficiency without compromising reliability For a renewal of the highest quality The gasket must be replaced with every overhaul
Barracuda Öleinfüllschraube "S" M20 x 1,5 Für Suzuki Modelle
Barracuda Öleinfüllschraube "S" M20 x 1,5 Für Suzuki Modelle Barracuda Öleinfüllschraube "S" M20x1,5, Aluminium schwarz eloxiert, für alle Suzuki Modelle Produktkennzeichnung: Barracuda Allgemein Produkt Typ: Barracuda Öleinfüllschraube "S" M20x1,5
Bow spoiler for Suzuki SV 650 (16-) - Barracuda
The Barracuda bow spoiler for the Suzuki SV650 is made of ABS. Available is this engine spoiler in black matte unpainted. The engine spoiler is supplied including mounting kit for the Suzuki SV650. An ABE is not available.
Chain guard for Suzuki SV 650 (16-) - Barracuda
The Barracuda chain guard for the Suzuki SV650 is made of black anodized aluminum and comes complete with mounting hardware.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash pads for Suzuki SV 650 (16-) - Barracuda
The Barracuda crash pads are specially manufactured for the respective motorcycle models and can be mounted on the motorcycle without additional modification. The scope of delivery includes the right and left crash pad and a vehicle-specific screw set. The plastic pad with anodized aluminum spacers is resistant and durable. Colored inserts are available for visual enhancement (Art.nr. BC-TA-INSERT: silver, black, gold, green, blue and red - please order separately, see "Additional items" tab), with which you can individualize your crash pads and color-match them to your motorcycle.
Factory Links steering head bearing kit Kawasaki/Suzuki/Yamaha
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
Givi Topcaseträger for Suzuki SV 650 / X (16-)
Specific topcase carrier for MONOKEY® or MONOLOCK® cases / to be mounted with the MONOKEY® plate M5, M7, M8A, M8B, M9A and M9B or the MONOLOCK® plate M5M and M6M or the anodized aluminum luggage carrier EX2M (not included) / with M8A, M8B, M9A and M9B it is not possible to mount the brake lights and/or the remote control An overview of our cases can be found below in the accessories! Maximum load for MONOKEY case 10 kg (for M8A, M8B, M9A and M9B plate 6 kg load), for MONOLOCK case 3 kg. Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
HIGHSIDER pro 45 mm headlight Dual-Stream LED black E-approved (1pc)
HIGHSIDER DUAL-STREAM LED headlight, black, E-approved The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing and robust bracket. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoid lens and the shutter technology with which a mechanical shutter switches between high and low beam. By using this modern LED technology, the smallest possible housing dimensions can be achieved with the greatest possible light output. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions:Lens diameter: approx. 45 mmHeight: 70.2 mmWidth: 67 mmDepth: 96.5 mmDistance between mounting holes: 67 mmLateral mounting holes: M 5 mmHousing material: aluminumWeight: 0.230 kg Power consumption:12V / 12W, 739.3 lm, low beam12V / 19 W, 739.3 lm, high beam Connections:Position light = brownLow beam = whiteThe white cable is connected to ignition plus (+) High beam = blueGround = green (-)
HIGHSIDER pro 5 3/4 inch headlight insert type 10 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 10 with parking light, E-approved Dimensions:Diameter A = 145 mmDiameter GA = 132 mmDiameter I = 125 mmT = 60 mmR = 10 mmCable length: 210 mm Weight: 658 gConnections: (3 pin plug) Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 11 LED black E-approved (1pc)
HIGHSIDER TYPE 11 7-inch LED main headlight insert, E-approved High beam, low beam, parking light and with TFL (daytime running light) function The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic See and be seen! This is extremely important for motorcyclists. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give your motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, then the LED main headlight is an excellent choice. The built-in LED daytime running light in TYPE 11 is the perfect way to improve visibility during the day. The ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizingly unique look. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight! Dimensions: A diameter = 170 mm GA Diameter = 165 mm I diameter = 160 mm T = 60 mm R = 9 mm Total depth from glass to cooling fins: 96 mm Cable length: 170 mm Connections: Power input: 3 pin connector Black cable = ground (-) White cable = low beam (+) Blue cable = high beam (+) TFL: Black cable = earth (-) Brown cable = daytime running light (+) Gray cable = parking light (+) Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 4 LED E-approved (1pc)
This round, chrome-plated reflector with clear glass has a high beam, low beam, parking light and daytime running light function. The daytime running light and position light are installed in a central strip, creating a very attractive light pattern - the low beam shines above the strip, while the high beam shines below it. The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic - and is E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W Yellow cable = high beam (+), power consumption at 12V: 1.3A, 13W Black cable = ground (-) TFL: Black cable = ground (-) Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W White cable = position light (+), power consumption at 12V: 0.2A, 2.4W Scope of delivery: 1 piece Note 1: - Asymmetrical use, only approved for right-hand traffic. - The enclosed 3-pin standard plug must be fitted by the customer after the reflector has been installed. View of plug contacts: High beam (yellow) = right Low beam (blue) = top Ground (black) = left Note 2: The daytime running light can also be used on vehicles without a light switch. This requires the following components, for example: Switch: Art. No. 240-044 HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER pro 7 inch headlight insert type 8 LED black E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 8- See and be seen! -Of the utmost importance for motorcyclists. The built-in LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light circuit on the vehicle is provided without additional control boxes or switches, complies with regulations and simplifies installation. Modern LED lighting technology has made huge progress in the headlight sector. An LED bend lighting headlight for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlamp with bend lighting offers clear advantages over a conventional headlamp. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Thanks to the improved illumination, you can see more of the bend and what is behind it. The rider can adjust better to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlight is available in black with tinted glass or in chrome with clear glass. The HIGHSIDER LED headlamp with daytime running light, position light and cornering light is of course E-approved. To switch from daytime running light to dipped beam: Press the high beam/flasher button briefly (approx. 1 second) and release the button as soon as the dipped beam is active. The low beam is then permanently active. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight!Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmConnections:Power input: 3-pin plugRed cable = low beam (+)White cable = high beam (+)Black cable = earth (-)Separate cable (round plug):Red cable = LED position light (+)Scope of delivery: 1 pieceNotes:The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. This resistor prevents the parking light error message.This headlight does NOT work in conjunction with the HIGHSIDER E-BOX TYPE 1 (item number: 208-200)
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair