Aluminum valve cap original Yamaha
Billet aluminum valve cap, with Yamaha logo. Available in 3 colors: black, blue, red.Scope of delivery: 2 pieces
ARROW Racing-Krümmer für Triumph Thruxton 2016- / Thruxton R 2016 & 2018- / Speed Twin 2019- , ohn
ARROW Racing-Krümmer für Triumph Thruxton 2016- / Thruxton R 2016 & 2018- / Speed Twin 2019- , ohne Katalysator ARROW Krümmer (ohne Katalysator), aus Edelstahl. Für Triumph Thruxton, Typ DE01, Modellahr 2016-18 Thruxton, Typ DE01A, Modelljahr 2018- Thruxton R, Typ DE01, Modelljahr 2016 Thruxton R, Typ DE01A, Modelljahr 2018- Speed Twin, Typ DD01, Modelljahr 2019- OEM-Katbox wird demontiert. Zur Verwendung mit Original- oder ARROW-Endschalldämpfer AR-71851 Produktkennzeichnung: Abgastechnik ARROW Hinweis: Zur Verwendung mit Original- oder ARROW-Endschalldämpfer AR-71851 (extra bestellen!) Geänderte Fahrzeugteile: OEM catalytic converter is removed Produkt Typ: ARROW Krümmer Triumph Thruxton 1200 16-, Edelstahl
C-Bow bag holder for Triumph Speed Twin (19-) Hepco & Becker
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
CL Brakes Racing sintered metal brake pads - 1033C60
C60 series, for racing use only
Easyrack for Triumph Speed Twin (19-) Hepco & Becker
Topcaseträger consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker Topcases or soft luggage (not suitable for topcases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack Topcaseträger + mounting kit + installation instructions there are no further adapters for topcase mounting needed high quality surface finish works technically almost the same as the Alurack topcase carrier, except that the bracket for topcase mounting can be folded when not in use and the Alurack bracket is rigid upwards the model-specific base carrier is the same for Easyrack and Alurack Luggage carriers do not require ABE or registration Recommended load: 5kg load (please note the model-specific instructions, the installation instructions and the motorcycle manufacturer's specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side panniers or tank bag. Recommended maximum speed: 130 km/h Designed for stock condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators.
Engine Guard chrome for Triumph Speed Twin (19-21) Hepco & Becker
Whether you are most of the time in heavy terrain, on the country road or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected at all times against unexpected mishaps.More than that, in the event of a rollover or unintentional contact with the ground, you can protect the motorcycle and the rider from greater damage.The guards from Hepco&Becker perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with integrated crash pad on new models.Different surface finishes are offered depending on the vehicle model. protects in the event of accidents and falls helpful when lashing the motorcycle high quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens, Germany comprehensive and easy to understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions if there are any restrictions or notes, please refer to the installation instructions or the vehicle specific notes no ABE or registration is required
Engine Guard for Triumph Speed Twin (19-21) Hepco & Becker
Whether you are most of the time in heavy terrain, on the country road or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected at all times against unexpected mishaps.More than that, in the event of a rollover or unintentional contact with the ground, you can protect the motorcycle and the rider from greater damage.The guards from Hepco&Becker perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with integrated crash pad on new models.Different surface finishes are offered depending on the vehicle model. protects in the event of accidents and falls helpful when lashing the motorcycle high quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens, Germany comprehensive and easy to understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions if there are any restrictions or notes, please refer to the installation instructions or the vehicle specific notes no ABE or registration is required
Flat superbike handlebar LSL XN1
X-Bar handlebars 28.6mm in the clamping area / 22.2mm at the endsThe X-Bar handlebars impress with a double bending stiffness compared to standard handlebars.This is the result of the design with a 28.6mm thick diameter in the clamping area and the use of a high-strength aluminum alloy.The handlebar bounces less and offers more reserves under extreme load.Available in a variety of colors.Incl. ABE for many current motorcycles. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document).For some models a preliminary required manufacturer's confirmation is available. ABE: DOWNLOAD HERESuitable vehicles: ManufacturerModelChassis numberYear of manufacture fromYear until Aprilia Shiver 900 KH000 2017 2017 Aprilia Shiver 900 KH000 2018 2018 Aprilia Shiver 900 2019 2019 Aprilia Tuono 1100 V4 Factory KGA00 2017 2017 Aprilia Tuono 1100 V4 Factory KGA00 2018 2018 Aprilia Tuono 1100 V4 Factory KGA00 2019 2019 Aprilia Tuono 1100 V4 RR KG000 2017 2017 Aprilia Tuono 1100 V4 RR KG000 2018 2018 Aprilia Tuono 1100 V4 RR KG000 2019 2019 BMW F 700 GS ABS 4G80/K70 2017 2017 BMW F 800 GS E8GS/K72 2017 2017 BMW G 310 R 5R31/K03 2016 2016 BMW G 310 R 5R31/K03 2017 2017 BMW G 310 R 5R31/K03 2018 2018 BMW G 310 R 5R31/K03 2019 2019 Ducati Scrambler Desert Sled KE35DS/KB00A 2017 2017 Ducati Scrambler Desert Sled KE35DS/KB00A 2018 2018 Honda CB 1000 R Neo Sports Cafe SC80A 2019 2019 Honda CB 1000 RA Neo Sports Cafe SC80A 2018 2018 Honda CB 300 R Neo Sports Cafe NC55 2018 2018 Honda CB 300 R Neo Sports Cafe 2019 2019 Honda CB 500 FA PC63A 2019 2019 Kawasaki Ninja 650 EX650K 2017 2017 Kawasaki Ninja 650 EX650K 2018 2018 Kawasaki Ninja 650 EX650KKDA 2019 2019 Kawasaki Z 900 RS ZR900CCA 2018 2018 Kawasaki Z 900 RS ZR900CCA 2019 2019 KTM 690 Duke ABS --- 2016 2016 KTM 690 Duke ABS 2017 2017 KTM 690 Duke R ABS --- 2016 2016 KTM 690 Duke R ABS 2017 2017 KTM 690 SMC R ABS LC4 2017 2017 KTM 790 Duke 2018 2018 KTM 790 Duke 2019 2019 Moto Guzzi V7 III Anniversario LDE00 2017 2017 Moto Guzzi V7 III Anniversario LDE00 2018 2018 Moto Guzzi V7 III Carbon LDG00 2019 2019 Moto Guzzi V7 III ie Carbon LDG00 2018 2018 Moto Guzzi V7 III ie Carbon LDG00 2019 2019 Moto Guzzi V7 III Limited 2019 2019 Moto Guzzi V7 III Milano 2019 2019 Moto Guzzi V7 III Milano ABS LDM00 2018 2018 Moto Guzzi V7 III Racer LDB00 2017 2017 Moto Guzzi V7 III Racer LDB00 2018 2018 Moto Guzzi V7 III Racer 2019 2019 Moto Guzzi V7 III Rough LDM00 2018 2018 Moto Guzzi V7 III Rough LDM00 2019 2019 Moto Guzzi V7 III Special LDA00 2017 2017 Moto Guzzi V7 III Special LDA00 2018 2018 Moto Guzzi V7 III Special LDA00 2019 2019 Moto Guzzi V7 III Stone LD000 2017 2018 Suzuki GSX-S 1000 DG1122 2017 2017 Suzuki GSX-S 1000 DG3222 2018 2018 Suzuki GSX-S 1000 DG3222 2019 2019 Suzuki GSX-S 1000 F DG1144 2017 2017 Suzuki GSX-S 1000 F DG3244 2018 2018 Suzuki GSX-S 1000 F DG3244 2019 2019 Triumph 1050 Speed Triple 515NV 2011 2011 Triumph 1050 Speed Triple 515NV 2012 2012 Triumph 1050 Speed Triple ABS 515NV 2013 2013 Triumph 1050 Speed Triple ABS 515NV 2014 2014 Triumph 1050 Speed Triple ABS 515NV 2015 2015 Triumph 1050 Speed Triple R NN01 2016 2016 Triumph 1050 Speed Triple R NN01 2017 2017 Triumph 1050 Speed Triple R ABS 515NV 2012 2012 Triumph 1050 Speed Triple R ABS 515NV 2013 2013 Triumph 1050 Speed Triple R ABS 515NV 2014 2014 Triumph 1050 Speed Triple R ABS 515NV 2015 2015 Triumph 1050 Speed Triple S NN01 2016 2016 Triumph 1050 Speed Triple S NN01 2017 2017 Triumph 675 Street Triple R L67LR 2017 2017 Triumph 765 Street Triple R HD01 2017 2017 Triumph 765 Street Triple R HD01A 2018 2018 Triumph 765 Street Triple R HD01A 2019 2019 Triumph 765 Street Triple RS HD01 2017 2017 Triumph 765 Street Triple RS HD01/A 2018 2018 Triumph 765 Street Triple RS HD01A 2019 2019 Triumph Speed Twin 1200 DP01 2019 2019 Triumph Street Scrambler DC01 2017 2017 Triumph Street Scrambler DC01 2018 2018 Triumph Street Scrambler DC03/R 2019 2019 Triumph Tiger 800 A08 2011 2011 Triumph Tiger 800 A08 2012 2012 Triumph Tiger 800 A08 2013 2013 Triumph Tiger 800 ABS A08 2011 2011 Triumph Tiger 800 ABS A08 2012 2012 Triumph Tiger 800 ABS A08 2013 2013 Triumph Tiger 800 ABS A08 2014 2014 Triumph Tiger 800 XC A08 2011 2011 Triumph Tiger 800 XC A08 2012 2012 Triumph Tiger 800 XC A08 2013 2013 Triumph Tiger 800 XC ABS A08 2011 2011 Triumph Tiger 800 XC ABS A08 2012 2012 Triumph Tiger 800 XC ABS A08 2013 2013 Triumph Tiger 800 XC ABS A08 2014 2014 Yamaha MT 125 RE114 2014 2014 Yamaha MT 125 RE114 2015 2015 Yamaha MT 125 RE114 2016 2016 Yamaha MT 125 A RE292 2017 2017 Yamaha MT 125 A RE292 2019 2019 Yamaha MT 125 A ABS RE115 2014 2014 Yamaha MT 125 A ABS RE115 2015 2015 Yamaha MT 125 A ABS RE115 2016 2016 Yamaha MT 125 A ABS RE292 2018 2018 Yamaha MT-07 RM17 2017 2017 Yamaha MT-09 RN435 2017 2017 Yamaha MT-09 RN435 2018 2018 Yamaha MT-09 2019 2019 Yamaha XSR 900 RN431 2016 2016 Yamaha XSR 900 RN431 2017 2017 Yamaha XSR 900 2018 2018 Yamaha XSR 900 2019 2019
Givi Topcaseträger for Triumph Speed Twin (19-)
Specific topcase carrier for MONOKEY® cases / with plate E251 (not included) / max. load 10 kg An overview of our MONOKEY cases you will find below in the accessories! Suitable for the following models: Triumph Speed Twin 1200 (19-20) Important note:GIVI products are designed for vehicles in original condition.Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed.
HIGHSIDER pro handlebar riser silver 15 mm, For Ø28.6mm handlebars
Clamp block increase +15 mm for X-Bar handlebars with ABEThe CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.Material: aluminiumMaterial treatment: anodizedMounting: Between clamping block and handlebar, 15mm riseDiameter: for handlebars with a Ø of 28.6mm in the clamping areaPitch: 38-46mmScrew length: 45 - 55 mmAttention:Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RM15 clamp in the enclosed ABE and all conditions are observed.For vehicles that are not listed in the model list, approval is possible through acceptance in accordance with § 19(2) StVZO.
HIGHSIDER pro X-Bar Drag Bar Wide XD2 Handlebar Aluminum Black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Drag Bar XD1 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike Flat XN1 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Black Bead-Shallow, Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Silver Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 handlebars black glossy, aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart Type BC 002 Repair Brake Lever Silver With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart brake levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right clutch lever, you are sure to find it in our bike finder.
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, Alu, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: aluminumColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
