Rims
Available categories
Matching articles
Bushing rim 12"/13", rear wheel for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm
When converting the GTS models to the 13" MP3 rims, complications usually arise at the rear wheel. The standard bushing on the drive shaft between wheel hub and rim is not compatible with the front wheel rim of the PIAGGIO MP3. The only thing that helps is turning off the original bushing. Who wants to save the time or has no possibility to work on this bushing professionally, should fall back on the SIP bushing. This is exactly adapted to the required diameter and can be mounted plug & play. Simply replaced by the original rear wheel bushing, the new rear wheel can be mounted immediately. When mounting the SIP rims 12 "/ 13 "this bushing is also needed on the rear wheel.
Conversion kit wheel hub rim 13", rear for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L/946 125-300ccm
With the help of the conversion kit 13" MP3 rims can be installed on a GTS/GTS Super/GTV/GT 60/GT/GT L . Mounting instructions Vespa GTS models with ABS: For models that are equipped with ABS as standard on the rear wheel, a mounting kit (Part No. MV000617) including new wheel bolts and screws for the tone wheel is required. This must be ordered at the same time.
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, black
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC black anodized
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, black matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC black matt anodized
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, chrome
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC chrome
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, gray matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC gray matt anodized
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, red
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC red anodized
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, silver
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC silver anodized
Dust cap 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, chrome
A cheap metal cover is mounted on the front wheel as standard, CNC milled caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC milled from high-quality aluminum and anodized in different colors. Installation is very easy with the enclosed O-ring, put it on the rim and you're done. Ø 42 mm Aluminum CNC chrome
Dust cap 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, black
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC black anodized
Dust cap 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, red
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC red anodized
Dust cap 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, silver
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC silver anodized
Dust cap rim front MK I for Vespa, black
for Vespa ET2/ET4/LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300cc 2T/4T Finally reasonable rims and no nice cap for the wheel nut? G-PRO has the optimal solution. With the CNC machined dust caps / caps for the rims in two different styles, the boring stainless steel caps are replaced. The caps are made of high quality aluminum, the surface is anodized in color. Due to the integrated O-ring, the dust caps hold optimally on original rims as well as rims from accessories. Aluminum CNC black anodized
Dust cap rim front MK I for Vespa, silver
for Vespa ET2/ET4/LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300cc 2T/4T Finally reasonable rims and no nice cap for the wheel nut? G-PRO has the optimal solution. With the CNC machined dust caps / caps for the rims in two different styles, the boring stainless steel caps are replaced. The caps are made of high quality aluminum, the surface is anodized in color. Due to the integrated O-ring, the dust caps hold optimally on original rims as well as rims from accessories. Aluminum CNC silver anodized
Dust cap rim front MK II for Vespa, black
for Vespa ET2/ET4/LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300cc 2T/4T Finally reasonable rims and no nice cap for the wheel nut? G-PRO has the optimal solution. With the CNC machined dust caps / caps for the rims in two different styles, the boring stainless steel caps are replaced. The caps are made of high quality aluminum, the surface is anodized in color. Due to the integrated O-ring, the dust caps hold optimally on original rims as well as rims from accessories. Aluminum CNC black anodized
Dust cap rim front MK II for Vespa, silver
for Vespa ET2/ET4/LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300cc 2T/4T Finally reasonable rims and no nice cap for the wheel nut? G-PRO has the optimal solution. With the CNC machined dust caps / caps for the rims in two different styles, the boring stainless steel caps are replaced. The caps are made of high quality aluminum, the surface is anodized in color. Due to the integrated O-ring, the dust caps hold optimally on original rims as well as rims from accessories. Aluminum CNC silver anodized
Dust cover 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, blue matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC blue matt anodized
Dust cover 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, orange matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC orange matt anodized
Dust cover 12" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, silver matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC silver matt anodized
Dust cover 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, black matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC black matt anodized
Dust cover 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300cc, silver matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC silver matt anodized
Dust cover 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, blue matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC blue matt anodized
Dust cover 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, chrome
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC chrome
Dust cover 13" rim front for Vespa GTS/GTS Super/GTV/GT 125-300ccm, gray matt
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC gray matt anodized