FZ 8 2011-2016 (RN25, 39P, 2SH, 59P)
Available categories
Matching articles
Akrapovic Slip-On Line (Carbon) exhaust for Yamaha FZ 8, FZ8 FAZER 2010-2015
Akrapovic Slip-On Line (carbon) rear silencer with carbon sleeve and carbon end cap, with EU approval; forYamaha FZ 8, FZ8 FAZER model year 2010-2015 Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike with more power, improved performance and the unique Akrapovic sound. All combined in the stylishly designed Slip-On exhausts. Akrapovic attaches great importance to design - this is reflected in two different exhaust systems. Choose your model with a carbon or titanium silencer cover. All slip-ons come with a carbon end cap. A race-proven material. Specifications compared to the series:Power +2.8 kW at 10000 rpmTorque +3.9 Nm at 5570 rpmWeight -3.2 kg
ATHENA Clutch cover gasket outer - Yamaha FZ8
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability. Clutch housing gasket For a high-quality overhaul The gaskets must always be replaced every time the engine is overhauled
Barracuda Kühlerverkleidung, für Yamaha FZ8 FZ1
Barracuda Kühlerverkleidung, für Yamaha FZ8 FZ1 Barracuda Kühlerverkleidung, Lieferumfang: Seitliche Kühlerverblendung links und rechts, für Yamaha FZ1 Modelljahr 2006-2015 und für Yamaha FZ8 Modelljahr 2010-2016 Produktkennzeichnung: Barracuda Verkleidungsteile Produkt Typ: Kühlerverkleidung Yamaha FZ1 / FZ8
Barracuda Montagekit Yamaha FZ1-N , Yamaha FZ8-N
Barracuda Montagekit Yamaha FZ1-N , Yamaha FZ8-N Barracuda Montagekit, für Yamaha FZ1-N Modelljahr 2006-2016 und für Yamaha FZ8-N Modelljahr 2010-2015 Produktkennzeichnung: Barracuda Allgemein Produkt Typ: Barracuda Montagekit Yamaha FZ1-N , Yamaha FZ8-N
Barracuda Öleinfüllschraube "Y" M27 x 3 für viele Yamaha Modelle
Barracuda Öleinfüllschraube "Y" M27 x 3 für viele Yamaha Modelle Barracuda Öleinfüllschraube "Y" M27x3, Aluminium schwarz eloxiert, für diverse Yamaha Modelle ausser: T-Max, MT09 (Tracer), MT-03, FZ9, XSR900 und XJR Modelle Produktkennzeichnung: Barracuda Allgemein Produkt Typ: Barracuda Öleinfüllschraube "Y" M27x3
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Electrosport controller
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Front left turn signal for: YAMAHA FZ6 '04-08
Dimensions and properties identical to standard component.
Front right turn signal for: YAMAHA FZ6 '04-08
Dimensions and properties identical to standard component.
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro distance bar black set 25mm
Handlebar spacers for Ø 22.2 mm handlebar diameters available in various colors and heights.Easy to raise the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro distance block silver set 25mm
Handlebar spacers for Ø 22.2mm handlebar diameter available in various colors and heights.Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro Dot handlebar weights black (pair)
HIGHSIDER handlebar weights DOT, chrome-plated or blackHandlebar weights made of chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weight: Diameter: 35.5 mmWidth: 17 mmMirror mount:Diameter: 29.8 mmWidth: 12 mmWeight with mounting parts: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair: 2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves type 1, type 2, type 3 each.2 x central bolt M6, lock washer and cone nut M6 each.Note:Spare mounting kit: 161-034
HIGHSIDER pro Evo handlebar weights
HIGHSIDER EVO bar ends, chrome-plated or black. Chrome-plated or black bar ends, suitable for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All our bar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the Bar End Weights. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your bike. With the highest level of quality and functionality, you can easily customize your bike to your liking. Dimensions: Diameter: 35.5 mm Length: 28 mm Specifications: Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 1 set, including mounting set and universal clamping system: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x central screw M6, toothed washer and conical nut M6. Note: Spare mounting kit: 1107882 (161-034)
HIGHSIDER pro handlebar weights black M6 Yamaha (pair)
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for YamahaBlack anodized aluminium handlebar weights for various Yamaha original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights. Fits e.g. XJ 600 Diversion, old models, FJR 1300A, FZ1, FZ8, YZF-R125, YZF R6, YZF R1.Precisely tuned - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Please check the dimensions for accuracy of fit before purchasing!Dimensions:Total width: 34 mmWidth outside the handlebar: 28 mmScrew length: 46 mm, M6 x 1.5 mmDiameter: 25.4 mmIf the dimensions of this item do not match the removed handlebar ends, please take a look at item 161-046.Scope of delivery: 1 pair
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER pro Street Bar L00 Handlebar Black 7/8 inch
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.