XJ 600 N 1994-2003 (4KA/KE/KF/MB, RJ01)
Available categories
Matching articles
ATHENA valve cover gasket
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability.Rocker arm cover gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauledSupplied without screw gaskets
BIHR Ignition lock YAMAHA TDM 850/TRX 850
Bihr ignition switchOE typeReplaces the damaged original ignition switchKit includes Steering lock with connection for harness and a set of ignition keys
BIHR Ignition lock YAMAHA XT-Z 750/FJ1200
Bihr ignition switchOE typeReplaces the damaged original ignition switchKit includes Steering lock with connection for harness and a set of ignition keys
Electrosport Stator - Yamaha
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Factory Links steering head bearing kit Kawasaki/Suzuki/Yamaha
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
Gas tank cap BIHR original type for: YAMAHA XJ600 N/FZR 600
Bihr fuel filler capStandard component type - identical to the standard componentEnables the cover to be replaced without modifications
HIGHSIDER pro handlebar adapter M16, For various Yamaha models (pair)
HIGHSIDER M16 mounting kit for various Yamaha motorcycles This special mounting kit enables the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards to be fitted to the original handlebars of Yamaha motorcycles. Using a suitable slotted screwdriver, the M16 x 1.5 threaded sleeves with M6 internal thread are screwed into the existing thread in the handlebars. The HIGHSIDER handlebar accessories with M6 central screw can now be fitted to the Yamaha handlebars. In order to create a sufficiently large distance between the handlebar and the attachment, the washers included in the set can be used if required. Dimensions: Adapter thread: Outer: M16 x 1.5 Thread length: 17 mm Adapter: Overall diameter: 20.9 mm Length: 35 mm Inside: M6 Washer: Outer diameter: 19 mm Inner diameter: 8.5 mm Scope of delivery: 2 x adapters 2 x washers
HIGHSIDER pro handlebar weights black M16x1.5 Yamaha (pair)
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for Yamaha Black anodized aluminium handlebar weights for various Yamaha original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights. Fits e.g. XJ 6 Diversion, 2010, FZ 6 S2 ABS, 2010, TDM 850 / 900.Also suitable for MT-09, MT-09 Tracer, but only without mounting the hand protectors! Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing! Dimensions:Total width: 43 mmWidth outside the handlebar: 28 mmThread Handlebar weight: 19 mm, M16 x 1.5 mm (The chrome-plated cap cannot be removed)Diameter: 25.4 mm
HIGHSIDER pro handlebar weights black M6 Yamaha (pair)
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for YamahaBlack anodized aluminium handlebar weights for various Yamaha original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights. Fits e.g. XJ 600 Diversion, old models, FJR 1300A, FZ1, FZ8, YZF-R125, YZF R6, YZF R1.Precisely tuned - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Please check the dimensions for accuracy of fit before purchasing!Dimensions:Total width: 34 mmWidth outside the handlebar: 28 mmScrew length: 46 mm, M6 x 1.5 mmDiameter: 25.4 mmIf the dimensions of this item do not match the removed handlebar ends, please take a look at item 161-046.Scope of delivery: 1 pair
HIGHSIDER pro Superbike A01 handlebar aluminum black, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike A01 handlebars black bead blasted, aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart handlebar weights black OEM style, For various Yamaha (pair)
HIGHSIDER smart handlebar weight Black handlebar weight made of aluminum. Suitable for various Yamaha original handlebars, e.g. XJ6 Div. 2010, FZ 6 S2 ABS 2010, TDM 850 / 900, etc.Dimensions Diameter: 35 mmLength 35 mmThread: M16 x 1.5 mmScope of delivery: 1 pairNote: Please check the dimensions for accuracy of fit before purchasing!
Rear left turn signal for: YAMAHA XJ600S DIVERSION '92-99, front right and rear left for: XJ600N
Dimensions and properties identical to standard component.
Rear right turn signal for: YAMAHA XJ600S DIVERSION '92-99, front left and rear right XJ600N 92-9
Dimensions and properties identical to standard component.
Tecnium Blue Label set of fork dust caps - KYB 41x53,4x7,5
Kit sealing ring & dust cap high quality TECNIUM by KOK. High performance kit Excellent sealing performance Excellent service life Resistant to extreme conditions Composition of the kit (suitable for one fork leg):1 fork seal1 dust cap
Tecnium by DZE controller
Regulator according to series typeQualitatively reliable replacementDeveloped in collaboration with DZE
Tecnium by DZE controller
Regulator according to series typeQualitatively reliable replacementDeveloped in collaboration with DZE
Tecnium clutch cable
With their braiding made of highly resistant and supple steel, they combine safety and reliability. The sheaths are fitted with nylon inserts for more comfortable control.