XSR 700 2016-2021 (RM11, RM12, RM36, RM37 (MTM690))
Available categories
Matching articles
Alurack Topcaseträger anthrazit for Yamaha XSR 700 / XSR 700 Xtribute (Bj.16-) Hepco & Becker
Motorcycle model specific bracket for mounting Hepco&Becker topcases (topcases with universal plate do not fit). Topcaseträger consisting of a model-specific mounting kit and the Alurack adapter plate to accommodate Hepco&Becker topcases or soft luggage (not suitable for topcases with universal plastic plate) Hepco&Becker Aluracks are designed specifically for the Hepco&Becker topcases. As the successor to the proven tubular luggage racks, the Alurack is seen as a consistent further development and is offered for motorcycles of the younger generation. Each Alurack top case carrier is developed specifically for the model and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid construction Scope of delivery: model-specific Alurack topcase carrier + mounting kit + mounting instructions no further adapters for topcase mounting are required high quality surface finish Recommended payload: 5kg payload in the topcase (please note vehicle-specific instructions, the deposited mounting instructions, as well as motorcycle manufacturer specifications) works technically almost the same as the Easyrack topcase carrier, except that the bracket for the topcase is rigidly upwards the model-specific base carrier is the same for Easyrack and Alurack a special bracket is required for the aluminum standard top case 35 (item number: HB700007350 or HB700007351) Luggage carriers do not require ABE or registration
ARROW exhaust REBEL Sip-On for Yamaha XSR 700 (21-)
ARROW REBEL Sip-On, black stainless steel rear silencer and carbon end cap, with dB-Killer insert, street legal,For Yamaha XSR700, type RM36, model year 2021-For mounting on ARROW manifold AR-71761KZ (with catalytic converter) or Arrow racing manifold AR-71642MI The REBEL exhaust was developed and designed with the best features of all Arrow systems.The conical shape of the muffler gives the exhaust a stunning sound. The black ceramic coating and carbon end cap of the muffler complete the high quality design.Features:- Eye-catching design- Breathtaking sound- Muffler with black ceramic coating
Barracuda Öleinfüllschraube "Y" M27 x 3 für viele Yamaha Modelle
Barracuda Öleinfüllschraube "Y" M27 x 3 für viele Yamaha Modelle Barracuda Öleinfüllschraube "Y" M27x3, Aluminium schwarz eloxiert, für diverse Yamaha Modelle ausser: T-Max, MT09 (Tracer), MT-03, FZ9, XSR900 und XJR Modelle Produktkennzeichnung: Barracuda Allgemein Produkt Typ: Barracuda Öleinfüllschraube "Y" M27x3
Barracuda turn signal X-LED B-LUX silver
Barracuda turn signal X-LED B-LUX, ABS plastic, color silver, universal use, power 1 watt, with LEDs, with E-mark, mounting thread M8, Supplied in pairs The X-LED B-LUX is an E-approved LED turn signal with approval for front and rear. In the basic version, the housing is made of high-quality ABS. Characteristic for the X-LED is its futuristic shape. The latest generation of these turn signals have the best LEDs currently available on the market and these are additionally supplied with a special optical glass, which increases the beam angle and thus the visibility additionally. The innovative You-Design concept allows an individual color design, perfectly matched to each bike. The turn signals are available in many different colors. The turn signal has a consumption of 1W. The price refers to the set (2 pieces).BARRACUDA's LED turn signals are universal and compatible with most motorcycles on the market. Each motorcycle has different bulbs and therefore may need resistors.- Motorcycles with 10 watt turn signal bulbs need the 10 watt resistors to balance the flashing frequency (part no. BC-RES10)- Motorcycles with 21 watt turn signal bulbs need the 21 watt resistors to balance the flashing frequency (part no. BC-RES21)- Motorcycles with original LED system do not need resistors.This is true for 99% of all motorcycles on the current market. But there are, as always, exceptions.For a smooth installation of BARRACUDA motorcycle LED turn signals we recommend the following accessories:- Turn signal adapters: these allow easy installation in the original openings of the fairing- BARRACUDA resistors to adjust the flashing sequence- Turn signal adapter cables: are needed to connect Barracuda turn signals to your vehicle. With these adapters you can install the turn signals without having to make any changes to the vehicle or cut the wiring harness.
Barracuda turn signal X-LED B-LUX silver
Barracuda turn signal X-LED B-LUX, ABS plastic, color silver, universal use, power 1 watt, with LEDs, with E-mark, mounting thread M8, Supplied in pairs The X-LED B-LUX is an E-approved LED turn signal with approval for front and rear. In the basic version, the housing is made of high-quality ABS. Characteristic for the X-LED is its futuristic shape. The latest generation of these turn signals have the best LEDs currently available on the market and these are additionally supplied with a special optical glass, which increases the beam angle and thus the visibility additionally. The innovative You-Design concept allows an individual color design, perfectly matched to each bike. The turn signals are available in many different colors. The turn signal has a consumption of 1W. The price refers to the set (2 pieces).BARRACUDA's LED turn signals are universal and compatible with most motorcycles on the market. Each motorcycle has different bulbs and therefore may need resistors.- Motorcycles with 10 watt turn signal bulbs need the 10 watt resistors to balance the flashing frequency (part no. BC-RES10)- Motorcycles with 21 watt turn signal bulbs need the 21 watt resistors to balance the flashing frequency (part no. BC-RES21)- Motorcycles with original LED system do not need resistors.This is true for 99% of all motorcycles on the current market. But there are, as always, exceptions.For a smooth installation of BARRACUDA motorcycle LED turn signals we recommend the following accessories:- Turn signal adapters: these allow easy installation in the original openings of the fairing- BARRACUDA resistors to adjust the flashing sequence- Turn signal adapter cables: are needed to connect Barracuda turn signals to your vehicle. With these adapters you can install the turn signals without having to make any changes to the vehicle or cut the wiring harness.
Billet brake fluid reservoir cover for Yamaha MT-07 / MT-09 / NIKEN / Tracer / XSR
High-quality billet brake fluid reservoir cover for Yamaha motorcycles. Gives your Yamaha a particularly cool and stylish touch. High quality cover with black anodized finish to replace the original brake fluid reservoir cover. Perfect complement to other optional anodized billet components from our accessories catalog. Easy to fit for a quick and uncomplicated upgrade of your bike. From Gilles Tooling, from the original Yamaha accessories catalog. Upgrade your Yamaha now with this exclusive accessory and attract attention! High-quality cover with black anodized finish to replace the original brake fluid reservoir cover. Gives your Yamaha a particularly cool and stylish touch Perfect complement to other optional anodized billet components from our accessories catalogue From Gilles Tooling from the original Yamaha accessories catalog. Easy mounting
Billet oil filler plug for XSR700 / MT-07 Original Yamaha
Discover the exclusive billet oil filler plug from Yamaha! With this high-quality accessory from Gilles.Tooling, you not only give your motorcycle an individual look, but also a special touch. The screw replaces the original and fits perfectly with the optionally available anodized aluminium accessories from the Billet collection. It is compatible with various models, including the XSR700 '16-'19, XSR700 XTribute '19, XSR700 Sport Edition ABS '18 and MT-07 '18-'20. See the quality and style of this unique product for yourself! - Custom oil filler plug- replaces the original - gives your XSR a special style.- Complements the optionally available anodized aluminium accessories of the billet collection- From Gilles.Tooling- From the original Yamaha accessories range Suitable for: XSR700 '16 '17 '18 '19 XSR700 XTribute '19 XSR700 Sport Edition ABS '18MT-07 '18 '19 '20
BMC Sport air filter for Yamaha MT-07 / Tracer 700 / XSR 700
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
C-Bow side carrier black for Yamaha XSR 700 / XSR 700 Xtribute (Bj.16-) Hepco & Becker
Motorcycle model-specific bracket for mounting bags and panniers with C-Bow receptacle. All Hepco & Becker side bags, leather bags or panniers with C-Bow receptacle can be attached to the motorcycle using model-specific C-Bow brackets. The unobtrusive and elegant design blends perfectly into the overall line of the vehicle. A sufficient safety distance of the bags to the hot tailpipe of the exhaust is self-evident. Thanks to the C-Bow technology, the matching bags are quickly and easily attached to the C-Bow carrier with just one click and are theft-protected and firmly locked by key. The bags are firmly attached to the motorcycle and remain in position even when loaded. The turn signals remain mostly in original position. Please note the deposited mounting instructions and model-specific instructions. solid carrier for mounting Hepco & Becker C-Bow side bags and panniers high quality coating precisely fitting, model-specific design adapted to the lines of the motorcycle normal Hepco & Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit the C-Bow carrier! the carrier is much more discreetly designed than a normal side case carrier and therefore not suitable for large payloads Recommended load: 5kg per bag (please note the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer specifications) can usually be combined with top case carriers, sissy bars, or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers
Carrier for soft side bags for the left side for Yamaha XSR 700
Carrier XSR700 for soft side bags for the left side in minimalist design, can be used as a single bag.
Carrier for soft side bags for the right side for Yamaha XSR 700
Carrier XSR700 for soft side bags for the right side in minimalist design, can be used as a single bag.
Catalyst for slip-on silencer for Yamaha models Akrapovic
Some non-street legal slip-on mufflers can be made street legal by installing this catalytic converter. Designed by Akrapovic
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg