alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT66
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT660, XJR1300, XV950, alpha Technik Bremsscheibe ABD33 schwimmend (Da=300mm, Di=132,2mm, Lochkreis=150mm), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Drosselkit 25 kW für Yamaha XV1600 Wild Star, VP08
alpha Technik Drosselkit 25 kW für Yamaha XV1600 Wild Star, VP08 Gutachten 25 kW für Yamaha XV1600 Wild Star, Fzg.Typ: VP08, ab Modelljahr 1999, ABE-Nr. K370, mit Umbauteil Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: Ansaugblende Produkt Typ: Drosselkit 25 kW für Yamaha XV1600 Wild Star, VP08 Lieferumfang: TÜV Gutachten und Drosselteil für Leistungsreduzierung auf 25 kW
alpha Technik Drosselkit 25 kW für Yamaha XV1600A, VP08
alpha Technik Drosselkit 25 kW für Yamaha XV1600A, VP08 "Motorradland" Gutachten 25 kW für Yamaha XV1600A, Fzg.Typ: VP08, ab Modelljahr 1998, mit ABE Nr. K 370, bzw. EG-BE Nr. e1*92/61*00029*00, von 46 kW, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: MOTORRADLAND: Gaszuganschlag Produkt Typ: Drosselkit 25 kW für Yamaha XV1600A, VP08 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung
alpha Technik NTN Radlager 60/22-LLU
alpha Technik NTN Radlager 60/22-LLU NTN Radlager 60/22-LLU, 1 Stück, Made in Japan, beidseitig mit Gummi abgedichtetes Rillenkugellager für verschiedene Modelle Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: NTN Radlager 60/22-LLU
Blinker BIHR orange, front / rear for: YAMAHA XV VIRAGO/XVS DRAGSTAR/XVZ ROYAL STAR
Dimensions and properties identical to standard component.
Electrosport Stator - Yamaha
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*:15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70*Evtl. oEM reference number listed is for comparison purposes only!
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*: 15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70 *Evtl. oEM reference number listed is for comparison purposes only!
Factory Links steering head bearing kit Kawasaki/Suzuki/Yamaha
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track handlebars steel chrome
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is given in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebar chrome 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebars black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 handlebar black 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Black 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Chrome 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar L00 Handlebar Black 1 inch
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Wide Bar L11 handlebar steel chrome, 1 inch, 95 -D
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
