alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT66
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT660, XJR1300, XV950, alpha Technik Bremsscheibe ABD33 schwimmend (Da=300mm, Di=132,2mm, Lochkreis=150mm), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Gabelwellendichtring Satz 46 x 58 x 10,5
alpha Technik Gabelwellendichtring Satz 46 x 58 x 10,5 ARI Simmerringsatz, Gabelwellendichtringe 46 x 58 x 10,5, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 46 x 58 x 10,5
alpha Technik NTN Radlager 60/22-LLU
alpha Technik NTN Radlager 60/22-LLU NTN Radlager 60/22-LLU, 1 Stück, Made in Japan, beidseitig mit Gummi abgedichtetes Rillenkugellager für verschiedene Modelle Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: NTN Radlager 60/22-LLU
Electrosport controller
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track handlebars steel chrome
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is given in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebar chrome 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebars black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 handlebar black 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Black 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Chrome 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar L00 Handlebar Black 1 inch
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Wide Bar L11 handlebar steel chrome, 1 inch, 95 -D
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Wide Bar L11 handlebars, steel, black, 1 inch, 95 -D
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart handlebar weights black OEM style, For various Yamaha (pair)
HIGHSIDER smart handlebar weight Black handlebar weight made of aluminum. Suitable for various Yamaha original handlebars, e.g. XJ6 Div. 2010, FZ 6 S2 ABS 2010, TDM 850 / 900, etc.Dimensions Diameter: 35 mmLength 35 mmThread: M16 x 1.5 mmScope of delivery: 1 pairNote: Please check the dimensions for accuracy of fit before purchasing!
LSL Butterfly L10, 1 Zoll, 95 mm, H-D, schwarz
LSL Butterfly L10, 1 Zoll, 95 mm, H-D, schwarz LSL Butterfly L10, 1 Zoll, 25,4mm Durchmesser,95 mm, H-D, Farbe Schwarz, Breite 1005mm, Höhe 113mm, Tiefe 212mm, Wandstärke 3mm, Klemmbereich 125mm, Griffrohrlänge 202mm, Rändelbreite 95mm Produktkennzeichnung: LSL Lenker Stahl Produkt Typ: Butterfly L10, 1 Zoll, 95 mm, H-D, schwarz
LSL Butterfly L10, 1 Zoll, 95 mm, H-D, verchromt
LSL Butterfly L10, 1 Zoll, 95 mm, H-D, verchromt LSL Butterfly L10, 1 Zoll, 25,4mm Durchmesser,95 mm, H-D, verchromt Breite 1005mm, Höhe 113mm, Tiefe 212mm, Wandstärke 3mm, Klemmbereich 125mm, Griffrohrlänge 202mm, Rändelbreite 95mm Produktkennzeichnung: LSL Lenker Stahl Produkt Typ: Butterfly L10, 1 Zoll, 95 mm, H-D, verchromt
