Liqui Moly

Specially formulated, water-miscible air filter cleaning concentrate.Has excellent cleaning properties, is very economical and economical to use.Gently dissolves dust, oil and grease without damaging the foam pores.Solvent-free and biodegradable.Properties - excellent cleaning effect - cleans gently - economical in use - contains no flammable solvents

Specially developed aerosol for wetting foam and fabric air filters.Dust and dirt are reliably retained even under extreme operating conditions, thus preventing engine damage.Ensures optimum air flow and thus maximum engine performance.Properties - waterproof - binds dust and sand - improves filtering ability - long engine life - reduces wear - extremely adhesive Application Suitable for use in all 2-stroke and 4-stroke motorcycles as well as cars, with air or water-cooled engines, in which foam or fabric air filters are installed.Application First remove coarse impurities from the filter by tapping it out. Clean the air filter with LIQUI MOLY Motorbike Air Filter Cleaner (Art. No. 1299) and, after the solvent has evaporated, wet with Motorbike Air Filter Oil (spray). Allow the air filter to flash off for approx. 10-15 minutes before installation! When working with Motorbike air filter oil (spray) make sure that the room is well ventilated!

Special oil for wetting foam air filters.Dust and dirt are reliably retained even under extreme operating conditions, thus preventing engine damage.Ensures optimum air flow and thus maximum engine performance.Properties - long engine life - high wear protection - excellent adhesion - water resistant - improves filterability - binds dust and sandApplication Suitable for use in all 2-stroke and 4-stroke motorcycles with air or water-cooled engines in which foam air filters are installed.Application Fill Motorbike Air Filter Oil into a suitable container. Remove coarse impurities from the foam air filter by tapping them out. Then place the foam air filter in the container filled with Motorbike air filter oil and knead the air filter several times. Allow the foam air filter to dry for approx. 10-15 minutes before installation When working with Motorbike Air Filter Oil, ensure good ventilation of the room!

Special cleaner with selected solvent combination. For fast, trouble-free cleaning and degreasing of structural parts in the two-wheel sector.INSTRUCTION: Place a cardboard box or rag under the parts to be cleaned. Spray dirty chains with Motorbike Chain and Brake Cleaner and let it run off. After the solvent has evaporated (approx. 10 min.), the chain is grease-free, clean and can be maintained with Motorbike Chain Lube (Art. No. 1508) or Motorbike Chain Spray white (Art. No. 1591). Do not spray on plastics Caution: Painted brake calipers and components as well as plastics, check for compatibility in a concealed location before use. Note: Do not place rubber parts to be cleaned in containers containing cleaning fluid, as these may be attacked.Caution: On painted surfaces, first check for compatibility at a concealed location.

Fully synthetic, extremely adhesive and water-resistant chain grease.- With excellent creeping and lubricating effect.- Particularly suitable for high-speed chains.- Reduces chain elongation and ensures longer chain life.- With most complex technology. Optimum effectiveness only when used unmixed.

White, fully synthetic special grease.- For optimum lubrication by visible application to the chain.- Cold, hot and splash water resistant. Very good adhesion and wear protection.- Reduces chain elongation and prolongs chain life.- Good creep and good corrosion protection.- The 400 ml can can be used to refill the 50 ml can.

White, fully synthetic special grease.- For optimum lubrication by visible application to the chain.- Cold, hot and splash water resistant. Very good adhesion and wear protection.- Reduces chain elongation and prolongs chain life.- Good creep and good corrosion protection.- The 400 ml can can be used to refill the 50 ml can.

Ready-to-use mixture based on ethylene glycol with a complex inhibitor package (OAT technology), specially developed for modern aluminum high-performance engines. The product is free of amines, nitrite, phosphates and silicates and offers excellent protection against frost, rust and overheating. This results in safe vehicle operation for year-round use.

Ready-to-use mixture based on ethylene glycol with a complex inhibitor package (OAT technology), specially developed for modern aluminum high-performance engines. The product is free of amines, nitrite, phosphates and silicates and offers excellent protection against frost, rust and overheating. This results in safe vehicle operation for year-round use.

Cleaning fluid to remove troublesome deposits from the inside of the engine. Dissolves sludge and varnish formers. Oil-soluble and oil-insoluble residues of all kinds are brought into suspension and removed from the oil circuit during oil changes. The engine, freed from deposits and contamination, and the fresh oil, not polluted by contaminants, can thus develop its full performance capacity.Application Cleans and flushes oil circuits on motorcycles with 4-stroke gasoline engines. The frequency of use depends on the degree of contamination of the oil circuit and the oil quality used Application A 250 ml can is sufficient for up to 4.5 l oil fill quantity. Add Motorbike Engine Flush to the engine oil at operating temperature before the oil change. After adding, let the engine run at idle speed for approx. 10 min. Then change oil and filter. Motorcycle Engine Flush is compatible with commercially available engine oils. Suitable for motorcycles with wet clutch.

Cleaning fluid to remove troublesome deposits from the inside of the engine. Dissolves sludge and varnish formers. Oil-soluble and oil-insoluble residues of all kinds are brought into suspension and removed from the oil circuit during oil changes. The engine, freed from deposits and contamination, and the fresh oil, not polluted by contaminants, can thus develop its full performance capacity.Application Cleans and flushes oil circuits on motorcycles with 4-stroke gasoline engines. The frequency of use depends on the degree of contamination of the oil circuit and the oil quality used Application A 250 ml can is sufficient for up to 4.5 l oil fill quantity. Add Motorbike Engine Flush to the engine oil at operating temperature before the oil change. After adding, let the engine run at idle speed for approx. 10 min. Then change oil and filter. Motorcycle Engine Flush is compatible with commercially available engine oils. Suitable for motorcycles with wet clutch.

Engine wear protection based on molybdenum disulfide (MoS2).Scientifically proven wear reduction up to 50%.- Extends the service life of the engine.- The engine runs more easily, oil and fuel consumption are reduced.- Increases engine smoothness, fewer breakdowns. Cat tested.Properties - miscible with commercially available engine oils - filterable with ultra-fine filters - catalyst-tested - high economy - reduces running-in and operating wear - absolutely filterable - reduces oil and fuel consumption - suitable for oil bath clutches - smooth engine running Application Suitable for all 4-stroke and 2-stroke engines with separate and mixture lubrication. Can also be used for oil bath multi-disc clutches Application Recommended dosage at every oil change or, in the case of 2-stroke engines, at every refueling. 4-stroke engines: 30 ml per liter of engine oil or 20 ml with wet clutch. 2-stroke engines: -with separate lubrication: 20 ml per liter of 2-stroke oil -with mixed lubrication: 10 ml per 10 l of mixture.

Increases the performance of the engine. For all 2-stroke engines with mixed or separate lubrication. Removesdeposits in the fuel system and on intake and exhaust ports and prevents their reformation.Protects the entire fuel system from corrosion. Cat tested.Clean engines consume less fuel and reduce pollutant emissions.Properties - increases operational safety- cat-tested - optimizes engine performance- environmentally friendly- high economy- prevents corrosion in the fuel system- breaks down residues- normalizes fuel consumption and exhaust gas values- cleans carburetor

Engine wear protection based on molybdenum disulfide (MoS2). - Scientifically proven wear reduction up to 50%. - Extends the life of the engine. - The engine runs more easily, oil and fuel consumption are reduced. - Increases engine smoothness, fewer breakdowns. Cat tested.For all 4-stroke and 2-stroke engines with separate and mixture lubrication. Can also be used with oil bath multi-disc clutches.Dosage recommendation with every oil change or with 2-stroke engines with every refueling. 4-stroke engines: 30 ml per liter of engine oil or with wet clutch 20 ml. 2-stroke engines with separate lubrication: 20 ml per liter of 2-stroke oil or with mixture lubrication: 10 ml per 10 l of mixture.APPLICATION: Dosage recommendation at every oil change or, with 2-stroke engines, at every refueling.4-stroke engines: 30 ml per liter of engine oil or with wet clutch 20 ml.2-stroke engines: -with separate lubrication: 20 ml per liter of 2-stroke oil -with mixture lubrication: 10 ml per 10 liters of mixture.

Increases the performance of the engine. Removes deposits in the fuel system, on valves, spark plugs and in the combustion chamber and prevents them from forming again. This also reduces fuel consumption. Protects the entire fuel system from corrosion. Prevents carburetor icing. Cat tested.Properties - good corrosion protection - environmentally friendly - for carburetor and injection engines - catalyst tested - reduces residues - optimizes engine performance - normalizes fuel consumption and exhaust gas values - high economy - increases operational safety APPLICATION:Addition to the fuel tank. Optimal effect by addition at each refueling. Fully compatible with all types of gasoline fuel. 80 ml sufficient for 5 to 10 l of fuel.

Reduces friction and wear and thus lowers oil and fuel consumption.Increases engine smoothness and reduces breakdowns.Properties - minimizes friction - reduces wear - easy engine running - reduces oil and fuel consumption - increases smooth running - prevents operating faults - miscible with commercially available gear oils - miscible with commercially available engine oils - catalyst-testedApplication For all 2-stroke engines with separate and mixture lubrication as well as for all 4-stroke engines also with oil bath multi-disc clutch. Also suitable for use in gearboxes and final drives. Cat tested Application Add to 4-stroke engines at every oil change or to 2-stroke engines when filling the oil or fuel tank. Shake well before use! Dosage: In 4-stroke engines or in the transmission: 20 ml (1 tube) sufficient for 1 l engine oil. In 2-stroke engines (mixed lubrication): 10 ml per 10 l fuel mixture or, in the case of separate lubrication, 20 ml per 1 l 2-stroke oil.

Modern, ash-free combination of active ingredients with acceleration-improving, cleaning, dispersing and material-protecting properties.Formulated according to the latest state-of-the-art additive and fuel technology, in line with the requirements of today's engines, operating materials and operating conditions.Provides more driving pleasure through optimized power output.The engine starts better and also runs more smoothly.Properties - higher power output - improves acceleration - protects fuel from oxidation and aging - cleans the fuel system - prevents corrosion in the fuel system - prevents carburetor icing - increases operational safety Application Addition to fuel in all 4- and 2-stroke gasoline engines.Application Addition to the fuel tank. Optimum effect by addition at each refueling. Fully compatible with all types of gasoline fuel. Can content is sufficient for up to 20 l of fuel.

Modern, ash-free combination of active ingredients with acceleration-improving, cleaning, dispersing and material-protecting properties.Formulated according to the latest state-of-the-art additive and fuel technology, in line with the requirements of today's engines, operating materials and operating conditions.Provides more driving pleasure through optimized power output.The engine starts better and also runs more smoothly.Properties - higher power output - improves acceleration - protects fuel from oxidation and aging - cleans the fuel system - prevents corrosion in the fuel system - prevents carburetor icing - increases operational safety Application Addition to fuel in all 4- and 2-stroke gasoline engines.Application Addition to the fuel tank. Optimum effect by addition at each refueling. Fully compatible with all types of gasoline fuel. Can content is sufficient for up to 20 l of fuel.

Preserves and protects fuel from aging and oxidation. Prevents corrosion throughout the fuel system. Ensures problem-free decommissioning of motorcycles, scooters, quads, snowmobiles and other gasoline-powered 4-stroke and 2-stroke engines. Increases operational safety. With long-term effect.- Suitable for all 4- and 2-stroke gasoline engines, especially for preventive use. - Turbo and catalyst tested. - One filling of the dosing container (25 ml) is sufficient for 5 l of fuel.APPLICATION:Add to fuel and refill at each refueling. One filling of the dosing container (25 ml) is sufficient for 5 l of fuel. Also suitable for continuous use in rarely used engines. Before decommissioning, add to the tank in the appropriate quantity and let the engine run for approx. 10 min.

The perfect dose to temporarily shut down motorcycles, scooters, quads, snowmobiles and other 2- and 4-stroke gasoline engines or support the function of infrequently operated engines.Its special formulation preserves and protects fuel from aging as well as oxidation and prevents corrosion throughout the fuel system. With long-term effect.

Cleans your helmet padding gently and thoroughly. - Eliminates unpleasant odors caused by bacteria and fungi within a very short time (approx. 10 min.). - Forms a protective film that prevents renewed rapid soiling.Properties - provides fresh, pleasant scent - eliminates bacteria - forms a protective film - removes musty odorApplication Shake well before use. Then spray the surface to be treated, leave to act and wipe dry with a cloth. In the case of plastic parts, check beforehand in a suitable place that there are no changes in color. Do not put on helmet immediately after cleaning, as the cleaner is based on an aqueous-alcoholic solution Note Ventilate the helmet well after using the cleaner

Care emulsion made of high-quality natural and synthetic substances.- Gives leather surfaces a silky shiny protective layer with impregnating effect.- Preserves structure, grip and elasticity of leather and protects against everyday dirt and wear.- Smoothes slightly worn leather surfaces and makes them more supple.- Regular use enhances the look and feel of the leather, prevents premature fading and prolongs its life.- Contains no dyes and can therefore be used on all leather colors including very light shades. Properties - excellent long-term protection - protects leather parts from becoming brittle - keeps the leather suppleField of application For all leather surfaces made of smooth leather such as seats, saddle bags, leather suits etc Application If necessary, clean the leather surfaces to be treated and allow to dry. Shake vigorously before use. Then apply to a soft cloth or tissue and apply a thin layer evenly using light pressure and circular movements. Polish off after a short exposure time. Regular use ensures optimum appearance. Not suitable for suede. Before use, test for material compatibility in a concealed area

Cares for and cleans your bike! Cleaning fluid specially developed for motorcycles, scooters, quads and snowmobiles Free from environmentally harmful solvents. APPLICATION: Spray the vehicle to be cleaned thinly and evenly when cold. Treat heavily soiled areas additionally with a brush. Depending on the degree of soiling, allow to act for 5-15 min. and rinse thoroughly with a hard water jet. After drying, rub with a soft cloth. In the case of repainted parts, check for compatibility (staining, paint peeling) on a concealed area. However, no damage to paintwork or plastics is to be expected if the product is used properly. When cleaning, the local regulations of the water management authorities must be observed. Attention: Do not use on vehicles with magnesium rims!

Cares for and cleans your bike! Cleaning fluid specially developed for motorcycles, scooters, quads and snowmobiles Free from environmentally harmful solvents. APPLICATION: Spray the vehicle to be cleaned thinly and evenly when cold. Treat heavily soiled areas additionally with a brush. Depending on the degree of soiling, allow to act for 5-15 min. and rinse thoroughly with a hard water jet. After drying, rub with a soft cloth. In the case of repainted parts, check for compatibility (staining, paint peeling) on a concealed area. However, no damage to paintwork or plastics is to be expected if the product is used properly. When cleaning, the local regulations of the water management authorities must be observed. Attention: Do not use on vehicles with magnesium rims!