Chrome tubular leather bag holder for Honda VT 750 C Shadow (04-07) Hepco & Becker

  The fixed mounting kit for Hepco & Becker Liberty, Nevada, Buffalo and Ivory leather panniers.   Scope of delivery: 1 x kit  (for one saddlebag)

  A model-specific tubular leather pannier holder is required for mounting (not included)Features: Made in our leather manufactory in the traditional craftsmanship tradition Highest quality leather and workmanship Leather from European livestock farming Tanned in accordance with the strictest environmental regulations Made from 3-4 mm thick, fully tanned cowhide, tear-resistant seams Brass-chromed rivets, elegant, high-quality accessories Stability thanks to concealed molded and reinforced parts Reinforced plastic back panel Robust belt buckles and elegant, high-quality accessories Lockable pockets, available with the same key Inner bag and rain cover as recommended accessories Recommended payload: 5-7kg per case (Please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Luggage systems generally do not require an ABE or registration in the papers suitable for many Hepco & Becker tubular leather pannier racks (please note possible restrictions for the respective model-specific rack) incl. key and locking cylinder for the lid Packing volume: 21 liters External dimensions (HxWxD): 30 x 50 x 22 cm Internal dimensions (HxWxD): 29 x 47 x 16 cm Weight: 5.6 kg Mounting options: 1. Fixed mounting (for an extra charge, see accessories, item number: 700429)Version for self-assembly with mounting set for fixed mounting on the saddlebag holder (saddlebags cannot be removed). Holes must be drilled in the rear wall of the saddlebag for this purpose.Note:  Once the retaining clips have been fitted, the saddlebag will only fit on the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with fitted retaining clips. We recommend the C-Bow version of the saddlebag (if a C-Bow side carrier is available for your motorcycle).No self-assembly is necessary here and a model change to another motorcycle with C-Bow is possible without any problems.2. Quick-release fastener self-assembly (for an extra charge, see accessories, article number: 700403)Another option when using a saddlebag holder is our quick-release fastener. This allows the saddlebag to be removed from the saddlebag holder at any time also secures the bag against theft by operating it from inside the bag.Please note:For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. Once the quick-release fastener has been fitted, the saddlebag will only fit the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with a quick-release fastener fitted.

  Hepco&Becker saddlebags are attached to the saddlebag holder with retaining claws as standard. The saddlebag is thus securely attached to the holder, but cannot be removed.As an accessory, Hepco&Becker offers a so-called quick-release fastener for self-assembly. This allows the saddlebag to be removed from the saddlebag holder at any time. The fastener also secures the bag against theft by operating it from inside the bag.Important note: For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. After fitting the quick-release fastener, the saddlebag only fits on the saddlebag holder connected to it. A change of model requires new holes. It is no longer possible to exchange a saddlebag with a quick-release fastener fitted. Scope of delivery: 1 piece incl. fastening material (for one saddlebag)

  high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW  

  A model-specific tubular leather pannier holder is required for mounting (not included)Features: Made in our leather manufactory in the traditional craftsmanship tradition Highest quality leather and workmanship Leather from European livestock farming Tanned in accordance with the strictest environmental regulations Made from 3-4 mm thick, fully tanned cowhide, tear-resistant seams Chrome-plated brass rivets, elegant, high-quality accessories Stability thanks to concealed molded and reinforced parts Reinforced plastic back panel Robust belt buckles and elegant, high-quality accessories Lockable pockets, available with the same key Inner bag and rain cover as recommended accessories Recommended payload: 5-7 kg per case (Please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Luggage systems generally do not require an ABE or registration in the papers suitable for many Hepco & Becker tubular leather pannier racks (please note possible restrictions for the respective model-specific rack) incl. key and locking cylinder for the lid Packing volume: 21 liters External dimensions (HxWxD): 30 x 50 x 22 cm Internal dimensions (HxWxD): 29 x 47 x 16 cm Weight: 5.6 kg Mounting options: 1. Fixed mounting (for an extra charge, see accessories, item number: 700429)Version for self-assembly with mounting set for fixed mounting on the saddlebag holder (saddlebags cannot be removed). Holes must be drilled in the rear wall of the saddlebag for this purpose.Note:  Once the retaining clips have been fitted, the saddlebag will only fit on the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with fitted retaining clips. We recommend the C-Bow version of the saddlebag (if a C-Bow side carrier is available for your motorcycle).No self-assembly is necessary here and a model change to another motorcycle with C-Bow is possible without any problems.2. Quick-release fastener self-assembly (for an extra charge, see accessories, article number: 700403)Another option when using a saddlebag holder is our quick-release fastener. This allows the saddlebag to be removed from the saddlebag holder at any time also secures the bag against theft by operating it from inside the bag.Please note:For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. Once the quick-release fastener has been fitted, the saddlebag will only fit the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with a quick-release fastener fitted.

  A model-specific tubular leather pannier holder is required for mounting (not included)Features: Made in our leather manufactory in the traditional craftsmanship tradition Highest quality leather and workmanship Leather from European livestock farming Tanned in accordance with the strictest environmental regulations Made from 3-4 mm thick, fully tanned cowhide, tear-resistant seams Chrome-plated brass rivets, elegant, high-quality accessories Stability thanks to concealed molded and reinforced parts Reinforced plastic back panel Robust belt buckles and elegant, high-quality accessories Lockable pockets, available with the same key Inner bag and rain cover as recommended accessories Recommended payload: 5-7 kg per case (Please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Luggage systems generally do not require an ABE or registration in the papers suitable for many Hepco & Becker tubular leather pannier racks (please note possible restrictions for the respective model-specific rack) Incl. key and locking cylinder for the lid Packing volume: 27 liters External dimensions (HxWxD): 30 x 50 x 28 cm Internal dimensions (HxWxD): 29 x 47 x 22 cm Weight: 7.0 kg Mounting options: 1. Fixed mounting (for an extra charge, see accessories, item number: 700429)Version for self-assembly with mounting set for fixed mounting on the saddlebag holder (saddlebags cannot be removed). Holes must be drilled in the rear wall of the saddlebag for this purpose.Note:  Once the retaining clips have been fitted, the saddlebag will only fit on the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with fitted retaining clips. We recommend the C-Bow version of the saddlebag (if a C-Bow side carrier is available for your motorcycle).No self-assembly is necessary here and a model change to another motorcycle with C-Bow is possible without any problems.2. Quick-release fastener self-assembly (for an extra charge, see accessories, article number: 700403)Another option when using a saddlebag holder is our quick-release fastener. This allows the saddlebag to be removed from the saddlebag holder at any time also secures the bag against theft by operating it from inside the bag.Please note:For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. Once the quick-release fastener has been fitted, the saddlebag will only fit the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with a quick-release fastener fitted.

  Details: For mounting on the Hepco & Becker tubular leather pannier rack or side pannier rack If the case set is ordered on its own, a fixed mounting kit is included, with which the cases can be permanently mounted on the tubular pannier rack. We offer an optional quick-release fastener: either as a factory fitting, professionally fitted by us directly, or for self-assembly. TheseAssembly kits can be found directly here in the accessories. If you order the quick-release fastener with factory fitting (recommended) and already have a carrier, you must send us the carrier beforehand so that we can fit the case to the corresponding carrier. The case will then only fit on this carrier. Scope of delivery: Case right + left + lock cylinder and key  Plastic case in leather look Refined surface with a soft feel Deep-drawn, impact-resistant ABS material Manufactured in our factory: MADE IN GERMANY Sturdy metal locks, ergonomic handle Can also be used as a city/briefcase Inner pocket and rain cover as recommended accessories Packing volume: 16 liters External dimensions (HxWxD): 35 x 44 x 18 cm Internal dimensions (HxWxD): 28 x 40.5 x 14 cm Material: synthetic leather/acrylonitrile-butadiene-styrene copolymer Weight: 5.2 kg

  A model-specific tubular leather pannier holder is required for mounting (not included)Features: Made in our leather manufactory in the traditional craftsmanship tradition Highest quality leather and workmanship Leather from European livestock farming Tanned in accordance with the strictest environmental regulations Made from 3-4 mm thick, fully tanned cowhide, tear-resistant seams Brass-chromed rivets, elegant, high-quality accessories Stability thanks to concealed molded and reinforced parts Reinforced plastic back panel Robust belt buckles and elegant, high-quality accessories Lockable pockets, available with the same key Inner bag and rain cover as recommended accessories Recommended payload: 5-7 kg per case (Please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Luggage systems generally do not require an ABE or registration in the papers fits many Hepco & Becker tubular leather pannier racks (please note possible restrictions for the respective model-specific rack) Incl. key and locking cylinder for the lid Packing volume: 27 liters External dimensions (HxWxD): 30 x 50 x 28 cm Internal dimensions (HxWxD): 29 x 47 x 22 cm Weight: 7.0 kg Mounting options: 1. Fixed mounting (for an extra charge, see accessories, item number: 700429)Version for self-assembly with mounting set for fixed mounting on the saddlebag holder (saddlebags cannot be removed). Holes must be drilled in the rear wall of the saddlebag for this purpose.Note:  Once the retaining clips have been fitted, the saddlebag will only fit on the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with fitted retaining clips. We recommend the C-Bow version of the saddlebag (if a C-Bow side carrier is available for your motorcycle).No self-assembly is necessary here and a model change to another motorcycle with C-Bow is possible without any problems.2. Quick-release fastener self-assembly (for an extra charge, see accessories, article number: 700403)Another option when using a saddlebag holder is our quick-release fastener. This allows the saddlebag to be removed from the saddlebag holder at any time also secures the bag against theft by operating it from inside the bag.Please note:For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. Once the quick-release fastener has been fitted, the saddlebag will only fit the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with a quick-release fastener fitted.