VT 750 C Shadow 2004-2016 (RC50)
Available categories
Matching articles
alpha Technik Gabelwellendichtring Satz 41x54x11
alpha Technik Gabelwellendichtring Satz 41x54x11 ARI Simmerringsatz, Gabelwellendichtringe 41x54x11, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41x54x11
C-Bow side carrier chrome for Honda VT 750 C Shadow (04-07) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco&Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.5 kg Color: chrome Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
C-Bow side carrier chrome for Honda VT 750 C Shadow (08-16) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco&Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.5 kg Color: chrome Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Chrome engine guard for Honda VT 750 C Shadow (04 -07) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: high-quality metal coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.1 kg Color: cromium Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Chrome engine guard for Honda VT 750 C Shadow (08-16) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: high-quality metal coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.1 kg Color: cromium Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Chrome tubular leather bag holder for Honda VT 750 C Shadow (04-07) Hepco & Becker
The bolted leather bag holders from Hepco&Becker are firmly attached to the motorcycle frame. Many leather panniers from Hepco&Becker fit on this carrier. Mounting of the panniers either via quick-release fastener or by fixed mounting.In the case of fixed mounting, the leather bags are then firmly screwed to the carrier; a fixed mounting kit is automatically included with the leather bag.With the quick-release solution, the leather panniers must be adapted to the specific model, as each model-specific leather pannier holder is shaped differently. The model-specific carriers are solidly developed and offer effective protection for the rider's or pillion rider's legs even in the event of a fall. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Suitable for many Hepco&Becker leather bags Luggage systems generally do not require ABE or registration Recommended payload: 5-7 kg per case (Please note the model-specific information on the respective carrier, as well as the motorcycle manufacturer-specific information) Color: chrome Weight: 2.5 kg Recommendation: Quick-release fastener Self-assembly Item number: 700403 Scope of delivery: Right + left incl. mounting material and instructions
Chrome tubular leather bag holder for Honda VT 750 C Shadow (08-16) Hepco & Becker
The bolted leather bag holders from Hepco&Becker are firmly attached to the motorcycle frame. Many leather panniers from Hepco&Becker fit on this carrier. Mounting of the panniers either via quick-release fastener or by fixed mounting.In the case of fixed mounting, the leather bags are then firmly screwed to the carrier; a fixed mounting kit is automatically included with the leather bag.With the quick-release solution, the leather panniers must be adapted to the specific model, as each model-specific leather pannier holder is shaped differently. The model-specific carriers are solidly developed and offer effective protection for the rider's or pillion rider's legs even in the event of a fall. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Suitable for many Hepco&Becker leather bags Luggage systems generally do not require ABE or registration Recommended payload: 5-7 kg per case (Please note the model-specific information on the respective carrier, as well as the motorcycle manufacturer-specific information) Color: chrome Weight: 2.5 kg Recommendation: Quick-release fastener Self-assembly Item number: 700403 Scope of delivery: Right + left incl. mounting material and instructions
Electrosport regulator - Honda VT750
ElectroSport regulators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Electrosport Stator - Honda VT700/VT750C
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Electrosport Stator - Honda VT750C
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Fender Guard chrome for Honda VT 750 C Shadow (04-07) Hepco & Becker
The Hepco&Becker Fender Guards are a highlight for every motorcycle fender and have a high-quality high-gloss chrome finish. The look of the lines is adapted to the motorcycle fender. Precisely fitting production and simple installation are a matter of course with Hepco & Becker fender guards. Features: Vehicle-specific development Design adapted to the lines of the motorcycle Precisely fitting production, simple installation Metal tube from German steel forge with high-quality high-gloss chrome plating Incl. mounting kit The Hepco&Becker Fender Guards are not subject to registration! Please refer to the installation instructions for installation questions Weight: 1.3 kg Color, chrome
Fender Guard chrome for Honda VT 750 C Shadow (08-16) Hepco & Becker
The Hepco&Becker Fender Guards are a highlight for every motorcycle mudguard and have a high-quality high-gloss chrome finish. The look of the lines is adapted to the motorcycle fender. Precisely fitting production and simple installation are a matter of course with Hepco & Becker fender guards. Features: Vehicle-specific development Design adapted to the lines of the motorcycle Precisely fitting production, simple installation Metal tube from German steel forge with high-quality high-gloss chrome plating Incl. mounting kit The Hepco&Becker Fender Guards are not subject to registration! Please refer to the installation instructions for installation questions Weight: 1.3 kg Color, chrome
Gas cap decor with HRC logo original for all Honda models
- Carbon look- HRC logo
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebar chrome 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebars black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER pro Roadster L01 handlebar black 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Black 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Chrome 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar L00 Handlebar Black 1 inch
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.