Filter by motorcycle model:
BIHR headlight type OE Moto Guzzi 750 BREVA, NEVADA
Diameter Ø 200 mm Depth 130 mm Bulb h4 + Position bulb
HIGHSIDER pro 120 mm headlight insert type 9 LED E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 9, round, 120 mm, with parking light ring High beam, low beam and parking light function. Asymmetrical insert Dimensions: Legend see picture in catalog for inserts. Diameter A = 120 mm Diameter GA = 113 mm Diameter I = 114 mm T = 50 mm R = 15 mm Cable length: 400 mm Weight: 0.430 kg Connections: (3 pin plug) white = high beam (+) red = low beam (+) black = earth (-) Position light (round plug) = green (+) Scope of delivery: 1 piece Notes: View of plug contacts: High beam (white) = right Low beam (red) = top Ground (black) = left
HIGHSIDER pro 4 1/2 inch headlight Classic 3 black E-approved (1pc)
HIGHSIDER 4 1/2 inch main headlight CLASSIC 3 for lower mountingHS1 Halogen main headlight with parking light and a high-quality, chrome-plated aluminum housing available in black or chrome. The reflector emits a bright, symmetrical light - for good road illumination and optimum visibility, E-approved.Attract attention - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Technical specifications:Light source: HS1, 12 V 35/35 WMounting: bottomDiameter: 125 mmDepth: 167 mmBracket center mounting screw to front: 116 mmMounting: bottom Connections: White cable = low beam (+)Green cable = ground of H4 bulbBlue cable = high beam (+)Red-black cable = parking light (+)Black cable = ground parking light (-)Scope of delivery: 1 piece, consisting of headlight and bulbNotes: Symmetrical reflector - also approved for left-hand trafficReplacement insert: 226-097
HIGHSIDER pro 45 mm headlight Dual-Stream LED black E-approved (1pc)
HIGHSIDER DUAL-STREAM LED headlight, black, E-approved The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing and robust bracket. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoid lens and the shutter technology with which a mechanical shutter switches between high and low beam. By using this modern LED technology, the smallest possible housing dimensions can be achieved with the greatest possible light output. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions:Lens diameter: approx. 45 mmHeight: 70.2 mmWidth: 67 mmDepth: 96.5 mmDistance between mounting holes: 67 mmLateral mounting holes: M 5 mmHousing material: aluminumWeight: 0.230 kg Power consumption:12V / 12W, 739.3 lm, low beam12V / 19 W, 739.3 lm, high beam Connections:Position light = brownLow beam = whiteThe white cable is connected to ignition plus (+) High beam = blueGround = green (-)
HIGHSIDER pro 5 3/4 inch Headlight Bates Style Type 5 LED Black Lower Mounting
HIGHSIDER pro 5 3/4 inch LED main headlight BATES STYLE TYPE 5, E-approvedStylish LED headlight with a black metal housing in BATES STYLE design. The round, chrome-plated reflector with black trim and clear glass has a high beam, low beam and parking light function.The low beam lights up in the upper half and both halves of the headlight light up when the high beam is switched on. The tested headlight is also robust and easy to install.Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series make it a highlight in any case!Dimensions:Front diameter: approx. 155 mmDepth: 90 mm, with ring approx. 92 mmBlind hole diameter: 8.8 mmBlind hole depth: 10 mmScrew: 9.4 x 20 mmThread: 24G 3/16, 7/32Height mounting block to ring: approx. 27 mmHeight mounting block: approx. 30 mmWidth/depth mounting block: approx. 22 mm Height mounting with block, center/center: approx. 39 mmMounting: bottomConnections:(3-pin plug)red = low beam (+)white = high beam (+)black = earth (-)brown = position light (+)black = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch Headlight Circle LED Black E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight CIRCLE, E-approved.The Light Guide technology produces a very homogeneous light ring with daytime running and parking light function. The CIRCLE headlight is available in a high-quality metal housing, either for bottom or side mounting, in black or chrome-plated.See and be seen - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!DimensionsDiameter of headlight insert: 146.5 mmDepth: 167 mm with glass.Fastening: on the side with M6 fastening screwsConnections: - 12.5 volt DC- 3 plugs:- Green cable = earth- White cable = low beam- Blue cable = high beam- Brown cable = parking light- Red cable = daytime running lightScope of delivery: 1 x main headlight2 x hexagon socket screws2 x 4 mm washers2 x 2 mm washers
HIGHSIDER pro 5 3/4 inch Headlight Circle LED Black E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight CIRCLE, E-approved.The Light Guide technology produces a very homogeneous light ring with daytime running and parking light function. The CIRCLE headlight is available in a high-quality metal housing, either for bottom or side mounting, in black or chrome-plated.The bright joy - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!DimensionsDiameter of headlight insert: 146.5 mmDepth: 167 mm with glass.Fastening: bottom with M6 fastening screwsConnections: - 12.5 volt DC- 3 plugs:- Green cable = earth- White cable = low beam- Blue cable = high beam- Brown cable = parking light- Red cable = daytime running lightScope of delivery: 1 x main headlight2 x hexagon socket screws2 x 4 mm washers2 x 2 mm washers
HIGHSIDER pro 5 3/4 inch headlight Frame-R2 Type 10 LED Black Lower mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 10, E-approved- Mounting WITHOUT housing, a light goes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably tight installation position is made possible and better cooling of the LED unit is also achieved.On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight.- Side mount, the conventional screw connection on the side of the lamp holder- Bottom mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, compensating for 32 mm in installation depth and 46 mm in width.Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation options- Flat installation- Modern look, stylish and innovative- The low beam lights up at the bottom and in the middle- The high beam lights up at the top- Parking light is left and right- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mmI diameter = 145 mmT = 60 mmR = 27 mmSide mounting variant: M8Connections / power consumption (3-pin plug):Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Frame-R2 Type 10 LED Black Side mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 10, E-approved- Mounting WITHOUT housing, a light goes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably tight installation position is made possible and better cooling of the LED unit is also achieved.On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight.- Side mount, the conventional screw connection on the side of the lamp holder- Bottom mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, compensating for 32 mm in installation depth and 46 mm in width.Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation options- Flat installation- Modern look, stylish and innovative- The low beam lights up at the bottom and in the middle- The high beam lights up at the top- Parking light is left and right- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mmI diameter = 145 mmT = 60 mmR = 27 mmSide mounting variant: M8Connections / power consumption (3-pin plug):Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Frame-R2 Type 5 LED Black Lower mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 5, E-approved- Mounting WITHOUT housing, a light goes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight. - Side Mount, the conventional screw connection on the side of the lamp holder- Bottom Mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, thus compensating for 32mm in installation depth and 46mm in width. Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation options- Flat installation- Modern look, stylish and innovative- Chrome-plated reflector with black trim and clear glass- High beam, low beam (upper half illuminated) and parking lightand parking light are generated by extra LEDs at the top and bottom- Asymmetrical luminous flux- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mm I diameter = 145 mmT = 60 mmR = 27 mmSide mounting variant: M8Connections, power consumption (3 pin plug):Red cable = low beam (+), at 12V, 25W (1121.2 lm)White cable = high beam (+),at 12V, 21W (1510.7 lm)Brown cable = parking light (+), at 12V 0.5 WattBlack cable = ground (-)Scope of delivery: 1 pieceNote:Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 5 3/4 inch Headlight Frame-R2 Type 5 LED Black Side mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 5, E-approved- Mounting WITHOUT housing, a light goes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight. - Side Mount, the conventional screw connection on the side of the lamp holder- Bottom Mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, thus compensating for 32mm in installation depth and 46mm in width. Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation options- Flat installation- Modern look, stylish and innovative- Chrome-plated reflector with black trim and clear glass- High beam, low beam (upper half illuminated) and parking lightand parking light are generated by extra LEDs at the top and bottom- Asymmetrical luminous flux- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mm I diameter = 145 mmT = 60 mmR = 27 mmSide mounting variant: M8Connections, power consumption (3 pin plug):Red cable = low beam (+), at 12V, 25W (1121.2 lm)White cable = high beam (+),at 12V, 21W (1510.7 lm)Brown cable = parking light (+), at 12V 0.5 WattBlack cable = ground (-)Scope of delivery: 1 pieceNote:Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 5 3/4 inch headlight Frame-R2 Type 7 LED Black Lower mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 7, E-approved- Mounting WITHOUT housing, a light comes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight. - Side Mount, the conventional screw connection on the side of the lamp holder- Bottom Mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, thus compensating for 32mm in installation depth and 46mm in width. Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation optionsglichkeiten- Flat installation- Modern look, stylish and innovative- Black reflector with clear glass- High beam, low beam (upper half lights up) and parking light ring- Symmetrical luminous flux- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mm I diameter = 145 mmT = 43 mmR = 27 mmSide mounting variant: M8Connections / power consumption (3 pin plug):White = low beam (+) / at 12V, 1.5 A, 15W (1010.6 lm)Red = high beam (+) / at 12V, 1.8 A, 21.5W (1637.5 lm)Green = position light (+) / at 12V, 0.16 A, 1.9WBlack = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Frame-R2 Type 7 LED Black Side mounting
HIGHSIDER pro LED main headlight FRAME-R2 TYPE 7, E-approved- Mounting WITHOUT housing, a light comes on. -Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R2 LED main headlight is an excellent choice.Two different mounting systems are available for variable mounting of the headlight. - Side Mount, the conventional screw connection on the side of the lamp holder- Bottom Mount, attachment at the bottom for screwing onto the fork bridgeThe side-mount holders can be mounted in three positions, thus compensating for 32mm in installation depth and 46mm in width. Features:- Round 5 3/4 inch headlight with CNC mounting ring and mounting kit- Mounting WITHOUT a headlight housing- Improves cooling- Many installation optionsglichkeiten- Flat installation- Modern look, stylish and innovative- Black reflector with clear glass- High beam, low beam (upper half lights up) and parking light ring- Symmetrical luminous flux- E-approved, nothing needs to be registeredGive your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Dimensions:A diameter = 165 mmGA diameter = 135 mm I diameter = 145 mmT = 43 mmR = 27 mmSide mounting variant: M8Connections / power consumption (3 pin plug):White = low beam (+) / at 12V, 1.5 A, 15W (1010.6 lm)Red = high beam (+) / at 12V, 1.8 A, 21.5W (1637.5 lm)Green = position light (+) / at 12V, 0.16 A, 1.9WBlack = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight insert Jackson LED E-approved (1pc)
HIGHSIDER LED main headlight insert JACKSON, 5 3/4 inchThis round, chrome-plated reflector has high beam, low beam and parking light as well as a clear lens. The parking light function is shown in the center of the insert as a light strip (Light Guide System). The reflector emits an asymmetrical - only approved for right-hand traffic - luminous flux, E-approved.Attract attention - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight!DimensionsDiameter A = 148 mmDiameter GA = 134 mmDiameter I = 128 mmT = 60 mmR = 11 mmTechnical specificationsVoltage: 12 VConnections with triple plugBlack = ground (-)Blue = low beam (+)Red = high beam (+)Separate cables:Red = parking light/parking light (+)Black = ground (-)Scope of delivery: 1 pieceOptional order:Complete headlight:5 3/4 inch LED main headlight JACKSON, black and chrome: Art.-No. 223-028 and 223-0295 3/4 inch main headlight #223-014, 223-015Plug for H4 bulbs, with 210 mm cable #396-042Does not fit in the BATES STYLE headlight, 5 3/4 inch (#222-018, -019)
HIGHSIDER pro 5 3/4 inch headlight insert type 10 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 10 with parking light, E-approved Dimensions:Diameter A = 145 mmDiameter GA = 132 mmDiameter I = 125 mmT = 60 mmR = 10 mmCable length: 210 mm Weight: 658 gConnections: (3 pin plug) Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight insert type 5 LED E-approved (1pc)
HIGHSIDER LED main headlight insert TYPE 5, E-approved.This round, chrome-plated reflector with black cover and clear glass has a high beam, low beam and parking light function.Also suitable as inserts for replacement for the following vehicles, for example:Victory HighballVictory GunnerIndian Scout BobberIndian Scout SixtyOur highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight!Dimensions: Diameter A = 145 mmDiameter GA = 133 mmDiameter I = 129 mmT = 60 mmR = 10 mmCable length: 400 mmConnections:Power input = 3-pin plugBlack cable = earth (-)Red cable = low beam (+)White cable = high beam (+)Brown cable = parking light (+)Scope of delivery: 1 pieceNote: The enclosed 3-pin standard plug must be fitted after the reflector has been installed.
HIGHSIDER pro 5 3/4 inch headlight insert type 6 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 6, E-approvedThis round, chrome-plated reflector has high beam, low beam, daytime running light and a parking light ring. The daytime running light is located in the center of the strip and the low beam lights up in the upper half of the insert. When the high beam is switched on, both halves light up.Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight!Dimensions:Diameter A = 143 mmDiameter GA = 133 mmDiameter I = 131 mm, T = 70 mm, R = 13 mmCable length: 400 mmPower consumption: (3 pin plug)Connections:White = low beam (+)Blue = high beam (+)Green = earth (-)Red = TFL/DRL (+) to ignition positiveBrown = position light (+)Scope of delivery: 1 piece incl. 1x connector housingNote:The daytime running light can also be used on vehicles without a light switch. The following components are required for this:- Order no. No.: 240-044 LIGHT ON/OFF SWITCH- Order. No.: 208-108 HIGHSIDER DRL CONTROL- BOX CB1 (switches between low beam and daytime running light)Note:If this product in conjunction with the HIGHSIDER DRL CONTROL- BOX CB1 (208-108) causes the headlight not to switch on the daytime running light after starting the engine, please proceed as follows:Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.
HIGHSIDER pro 5 3/4 inch Headlight insert type 7 LED Black With parking light ring, Round, E-Gepr
HIGHSIDER LED main headlight insert TYPE 7, E-approvedThis round, black or chrome-plated reflector has a high beam, low beam and parking light ring. The low beam lights up in the upper half of the insert and both halves light up when the high beam is switched on.Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight!Dimensions:Diameter A = 143 mmDiameter GA = 133 mmDiameter I = 131 mm, T = 43 mm, R = 12 mmCable length: 400 mmPower consumption: (3 pin plug)Connections:white = low beam (+)red = high beam (+)black = earth (-)green = position light (+)Scope of delivery: 1 piece incl. 1x plug housing
HIGHSIDER pro 5 3/4 inch Headlight Pecos Type 12 LED Black Side mounting, With TFL
HIGHSIDER pro 5 3/4 inch LED headlight PECOS TYPE 12 with TFL, E-approvedThe robust, puristically shaped main headlight with matt black metal housing also has a daytime running light in addition to high beam, low beam and parking light.The PECOS TYPE 12 is characterized by the latest lighting technology and the unusual light design.The daytime running light for even more visibility in road traffic.A black cover divides the reflector into an upper and lower half.The low beam lights up in the upper half of the reflector and the lower half also lights up when the high beam is switched on.The parking light forms the outer ring around the reflector.The simple design is ideal for classic bikes, roadsters and custom bikes.Eye-catching - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Features:- Light source: LED- Lens: clear- Housing: matt black metal housing- Reflector: chrome-plated with TFL/DRL and parking light ring- Mounting point: on the side of the housingDimensions:- Housing Ø: 165mm- Inner Ø of the ring: 136mm- Total depth: 135mm (incl. lens) - Weight: 12.5 kg. Glass)- Weight: 1250g- Thread: M8- Housing depth: approx. 75mm (measured from the center of the side mounting holes to the back)- Distance between side mounting points: approx. 160mmConnections3-pin plug:- Red = low beam (+)- White = high beam (+)- Black = earth (-)Separate cables:- Blue = TFL/DRL (+) to ignition positive- Brown = Parking light (+)Power consumption:- Low beam: 17.55W at 13.5V, 1.3A- High beam: 18.9W at 13.5V, 1.4A- TFL: 10.8W at 13.5V, 0.8A- Position light: 1.35W at 13.5V, 0.1AScope of delivery: 1 pieceOptionally available to order:- HIGHSIDER pro DRL CONTROL- BOX CB1 , daytime running light control box for vehicles without light switch, 12V Art.-No.: 208-108- Light switch on/off with clamp for handlebar mounting e.g. ArtNo.: 240-044Note:If, when using this product in conjunction with the HIGHSIDER pro DRL CONTROL BOX CB1 (208-108), the headlight does not switch on the daytime running light after starting the engine, please proceed as follows:Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.
HIGHSIDER pro 5 3/4 inch headlight Pecos Type 5 LED Black Lower mounting
HIGHSIDER pro 5 3/4 inch LED headlight PECOS TYPE 5, E-approvedThe robust, puristically shaped main headlight with matt black metal housing has high beam, low beam and parking light.The PECOS TYPE 5 is characterized by the latest lighting technology and the extraordinary light design.A black bar divides the reflector into an upper and lower half.The low beam lights up in the upper half of the headlamp and the lower half also lights up when the high beam is switched on.The parking light forms the outer ring around the reflector.The simple design is ideal for classic cars, roadsters and custom bikes. Eye-catching - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Features:- Light source: LED- Lens: clear- Housing: matt black metal housing- Reflector: chrome-plated with black bar- Mounting point: below, adjustable or on the side of the housingDimensions:- Housing Ø: 165mm- Inner Ø of the ring: 136mm- Total depth: 135mm (incl. glass) - Weight: 12 kg. Glass)- Weight: 1250g- Mounting height: 36mm (measured to lower edge of lamp ring)- Fastening: screw 25x12mm (thread 24G 3/16 7/32)Connections3 pin plug:- Red = low beam (+)- White = high beam (+)- Black = ground (-)Separate cable:- Brown = parking light (+)Power consumption:- Low beam 25W at 12V (1121.2lm)- High beam 21W at 12V (1510.7lm)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Pecos Type 5 LED black, black lens, side lighting
HIGHSIDER pro 5 3/4 inch LED headlight PECOS TYPE 5, E-approvedThe robust, puristically shaped main headlight with matt black metal housing has high beam, low beam and parking light.The PECOS TYPE 5 is characterized by the latest lighting technology and the extraordinary light design.A black bar divides the reflector into an upper and lower half.The low beam lights up in the upper half of the headlamp and the lower half also lights up when the high beam is switched on.The parking light forms the outer ring around the reflector.The simple design is ideal for classic cars, roadsters and custom bikes. Eye-catching - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Features:- Light source: LED- Lens: clear- Housing: matt black metal housing- Reflector: chrome-plated with black bar- Mounting point: below, adjustable or on the side of the housingDimensions:- Housing Ø: 165mm- Inner Ø of the ring: 136mm- Total depth: 135mm (incl. glass) - Weight: 12 kg. Glass)- Weight: 1250g- Thread: M8- Housing depth: approx. 75mm (measured from the center of the side mounting holes to the back)- Distance side mounting points: approx. 160mmConnections3 pin plug:- Red = low beam (+)- White = high beam (+)- Black = earth (-)Separate cable:- Brown = parking light (+)Power consumption:- Low beam 25W at 12V (1121.2lm)- High beam 21W at 12V (1510.7lm)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Pecos type 5 LED chrome E-approved (1pc)
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 5, E-approvedPuristically shaped main headlight with matt black or chrome-plated metal housing has a high beam, low beam and parking light function. The dipped beam lights up in the upper half and both halves of the headlamp light up when the main beam is switched on. A black bar is integrated in the center of the reflector. The simple design is ideal for classic bikes, roadsters and customized bikes. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Features:- Light source: LED- Lens: clear- Chrome-plated reflector with black trim- Mounting point: bottomDimensions:Housing diameter: 165 mmDepth: 135 mmConnections: Power consumption: 3-pin plugRed = low beam (+)White = high beam (+)Brown = position light (+)Black = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch headlight Pecos Type 6 LED Black Lower mounting, With TFL
HIGHSIDER pro 5 3/4 inch LED headlight PECOS TYPE 6 with TFL, E-approvedThe robust, puristically shaped main headlight with matt black metal housing has high beam, low beam and parking light.The special feature of this LED headlamp is the additional daytime running light.The PECOS TYPE 6 is characterized by the latest lighting technology and exceptional lighting design.The daytime running light for even greater visibility on the road divides the reflector into an upper and lower half.The dipped beam lights up in the upper half of the reflector and the lower half also lights up when the main beam is switched on.The parking light forms the outer ring around the reflector.The simple design is ideal for classic bikes, roadsters and custom bikes.Eye-catching - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!Features:- Light source: LED- Lens: clear- Housing: matt black metal housing- Reflector: chrome-plated with TFL/DRL and parking light ring- Mounting point: bottom, adjustable or on the side of the housingDimensions:- Housing Ø: 165mm- Inner Ø of the ring: 136mm- Total depth: 135mm (incl. lens) - Weight: 12 kg. Glass)- Weight: 1250g- Mounting height: 36mm (measured to lower edge of lamp ring)- Fastening: Screw 25x12mm (thread 24G 3/16 7/32)Connections3-pin plug:- White = low beam (+)- Blue = high beam (+)- Green = ground (-)Separate cables:- Red = TFL/DRL (+) to ignition positive- Brown = Parking light (+)Power consumption:- Low beam 15W at 12V (According to manufacturer 1106.2lm)- High beam 27W at 12V(According to manufacturer 1657.9lm)Scope of delivery: 1 pieceCan be ordered optionally:- HIGHSIDER pro DRL CONTROL- BOX CB1 , Daytime running light control box for vehicles without light switch, 12V Art.-No.: 208-108- Light switch on/off with clamp for handlebar mounting e.g. ArtNo.: 240-044Note:If, when using this product in conjunction with the HIGHSIDER pro DRL CONTROL BOX CB1 (208-108), the headlight does not switch on the daytime running light after starting the engine, please proceed as follows:Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.
HIGHSIDER pro 5 3/4 inch Headlight Pecos Type 6 LED Black Matt With TFL, E-Approved (1pc)
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 6 with TFL, black matt or chrome-plated, E-approvedPuristically shaped main headlight with metal housing for lower mounting. The PECOS TYPE 6 is characterized by the latest lighting technology and exceptional lighting design. The special feature of this LED headlight is the additional equipment with daytime running light and parking light ring. The daytime running light for even greater visibility in road traffic is located in the centrally positioned strip. The dipped beam lights up in the upper half of the headlight and both halves light up when the main beam is switched on.Attract attention - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Features:- Light source: LED- Lens: clear- Chrome-plated reflector with TFL/DRL and parking light ring- Mounting point: bottomDimensions:Housing diameter: 165 mmDepth: 135 mmConnections:Power consumption: 3-pin plugWhite = low beam (+)Blue = high beam (+)Green = earth (-)Red = TFL/DRL (+) to ignition positiveBrown = position light (+)Scope of delivery: 1 pieceCan be ordered as an option:- Order no. 208-108 HIG. No.: 208-108 HIGHSIDER DRL CONTROL- BOX CB1 , Daytime running light control box for vehicles without light switch, 12V- Prod. No.: 240-044 Light switch on/off with clamp for handlebar mountingNote:If this product in conjunction with the HIGHSIDER DRL CONTROL- BOX CB1 (208-108) causes the headlight not to switch on the daytime running light after starting the engine, please proceed as follows:Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.