Guerrilla 450 2024-
Available categories
Matching articles
C-Bow side carrier for Royal Enfield Guerrilla 450 (24-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Scope of delivery: left, right, mounting material and instructions Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Engine guard black for Royal Enfield Guerrilla 450 (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Lamp guard for Royal Enfield Guerrilla 450 (24-) Hepco & Becker
The Hepco & Becker lamp guard protects the headlight in many cases and also gives your bike the appropriate off-road look. adapted to the design of the motorcycle effective protection no reflections or danger from glare simple mounting on mostly existing screw points solid construction made from German steel robust and high-quality coating made in Germany without TÜV
LED auxiliary headlight Nova incl. universal mounting for tube Ø18-25mm Hepco & Becker
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.The brand new Nova LED auxiliary headlight - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be added flexibly via the switch on the handlebars Additional information: Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams. Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings. The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this. Note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
SHAD Top Master Befestigungssatz
Die SHAD Top Master Befestigung ermöglicht es, ein Topcase über dem Motorrad zu montieren.. Es handelt sich um eine Befestigung, die speziell für jedes Motorradmodell und seine spezifischen Eigenschaften entworfen wurde.. Das Ergebnis ist ein qualitativ hochwertiges Produkt, das bequem und sicher ist und sich leicht montieren und demontieren lässt. .
Tank ring BASIC for Royal Enfield Guerrilla 450 (24-) Hepco & Becker
This functional tank ring enables the attachment of a Hepco & Becker tank bag. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the store to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds mechanical locking mechanism Simple operation the Hepco & Becker tank bag is simply put on and locks audibly on the tank ring thanks to an ingenious mechanism Unlocking: The mechanism is unlocked by a lashing strap at the front of the tank bag in the direction of travel; the tank bag is simply removed Simple but effective mechanism Recommended maximum speed with tank bag fitted: 130 km/h (Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product) Recommended load in the tank bag: approx. 3kg Tank bag systems do not require an ABE or registration in the papers in Germany. Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Note: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
Tubular luggage rack for Royal Enfield Guerrilla 450 (24-) Hepco & Becker
The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco & Becker universal luggage rack extension Recommended load: 5 kg (Please observe the model-specific instructions and the motorcycle manufacturer's specifications. Heavy luggage should generally be transported on the rear, but in the side cases or tank bag. can usually be combined with side case carriers or C-Bow holders without any problems (observe the fitting instructions and model-specific information) Luggage racks generally do not require an ABE or registrationScope of delivery: luggage rack + mounting material + instructions For top case mounting only suitable for models with universal plate.