Speed Triple 1050 S /R 2016-2018 (NN01)
Available categories
Matching articles
C-Bow bag holder for Triumph Speed Triple 1050 S / R (16-18) Hepco & Becker
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Factory Links steering head bearing kit TM EN125/250/300
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
Flat superbike handlebar LSL XN1
X-Bar handlebars 28.6mm in the clamping area / 22.2mm at the endsThe X-Bar handlebars impress with a double bending stiffness compared to standard handlebars.This is the result of the design with a 28.6mm thick diameter in the clamping area and the use of a high-strength aluminum alloy.The handlebar bounces less and offers more reserves under extreme load.Available in a variety of colors.Incl. ABE for many current motorcycles. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document).For some models a preliminary required manufacturer's confirmation is available. ABE: DOWNLOAD HERESuitable vehicles: ManufacturerModelChassis numberYear of manufacture fromYear until Aprilia Shiver 900 KH000 2017 2017 Aprilia Shiver 900 KH000 2018 2018 Aprilia Shiver 900 2019 2019 Aprilia Tuono 1100 V4 Factory KGA00 2017 2017 Aprilia Tuono 1100 V4 Factory KGA00 2018 2018 Aprilia Tuono 1100 V4 Factory KGA00 2019 2019 Aprilia Tuono 1100 V4 RR KG000 2017 2017 Aprilia Tuono 1100 V4 RR KG000 2018 2018 Aprilia Tuono 1100 V4 RR KG000 2019 2019 BMW F 700 GS ABS 4G80/K70 2017 2017 BMW F 800 GS E8GS/K72 2017 2017 BMW G 310 R 5R31/K03 2016 2016 BMW G 310 R 5R31/K03 2017 2017 BMW G 310 R 5R31/K03 2018 2018 BMW G 310 R 5R31/K03 2019 2019 Ducati Scrambler Desert Sled KE35DS/KB00A 2017 2017 Ducati Scrambler Desert Sled KE35DS/KB00A 2018 2018 Honda CB 1000 R Neo Sports Cafe SC80A 2019 2019 Honda CB 1000 RA Neo Sports Cafe SC80A 2018 2018 Honda CB 300 R Neo Sports Cafe NC55 2018 2018 Honda CB 300 R Neo Sports Cafe 2019 2019 Honda CB 500 FA PC63A 2019 2019 Kawasaki Ninja 650 EX650K 2017 2017 Kawasaki Ninja 650 EX650K 2018 2018 Kawasaki Ninja 650 EX650KKDA 2019 2019 Kawasaki Z 900 RS ZR900CCA 2018 2018 Kawasaki Z 900 RS ZR900CCA 2019 2019 KTM 690 Duke ABS --- 2016 2016 KTM 690 Duke ABS 2017 2017 KTM 690 Duke R ABS --- 2016 2016 KTM 690 Duke R ABS 2017 2017 KTM 690 SMC R ABS LC4 2017 2017 KTM 790 Duke 2018 2018 KTM 790 Duke 2019 2019 Moto Guzzi V7 III Anniversario LDE00 2017 2017 Moto Guzzi V7 III Anniversario LDE00 2018 2018 Moto Guzzi V7 III Carbon LDG00 2019 2019 Moto Guzzi V7 III ie Carbon LDG00 2018 2018 Moto Guzzi V7 III ie Carbon LDG00 2019 2019 Moto Guzzi V7 III Limited 2019 2019 Moto Guzzi V7 III Milano 2019 2019 Moto Guzzi V7 III Milano ABS LDM00 2018 2018 Moto Guzzi V7 III Racer LDB00 2017 2017 Moto Guzzi V7 III Racer LDB00 2018 2018 Moto Guzzi V7 III Racer 2019 2019 Moto Guzzi V7 III Rough LDM00 2018 2018 Moto Guzzi V7 III Rough LDM00 2019 2019 Moto Guzzi V7 III Special LDA00 2017 2017 Moto Guzzi V7 III Special LDA00 2018 2018 Moto Guzzi V7 III Special LDA00 2019 2019 Moto Guzzi V7 III Stone LD000 2017 2018 Suzuki GSX-S 1000 DG1122 2017 2017 Suzuki GSX-S 1000 DG3222 2018 2018 Suzuki GSX-S 1000 DG3222 2019 2019 Suzuki GSX-S 1000 F DG1144 2017 2017 Suzuki GSX-S 1000 F DG3244 2018 2018 Suzuki GSX-S 1000 F DG3244 2019 2019 Triumph 1050 Speed Triple 515NV 2011 2011 Triumph 1050 Speed Triple 515NV 2012 2012 Triumph 1050 Speed Triple ABS 515NV 2013 2013 Triumph 1050 Speed Triple ABS 515NV 2014 2014 Triumph 1050 Speed Triple ABS 515NV 2015 2015 Triumph 1050 Speed Triple R NN01 2016 2016 Triumph 1050 Speed Triple R NN01 2017 2017 Triumph 1050 Speed Triple R ABS 515NV 2012 2012 Triumph 1050 Speed Triple R ABS 515NV 2013 2013 Triumph 1050 Speed Triple R ABS 515NV 2014 2014 Triumph 1050 Speed Triple R ABS 515NV 2015 2015 Triumph 1050 Speed Triple S NN01 2016 2016 Triumph 1050 Speed Triple S NN01 2017 2017 Triumph 675 Street Triple R L67LR 2017 2017 Triumph 765 Street Triple R HD01 2017 2017 Triumph 765 Street Triple R HD01A 2018 2018 Triumph 765 Street Triple R HD01A 2019 2019 Triumph 765 Street Triple RS HD01 2017 2017 Triumph 765 Street Triple RS HD01/A 2018 2018 Triumph 765 Street Triple RS HD01A 2019 2019 Triumph Speed Twin 1200 DP01 2019 2019 Triumph Street Scrambler DC01 2017 2017 Triumph Street Scrambler DC01 2018 2018 Triumph Street Scrambler DC03/R 2019 2019 Triumph Tiger 800 A08 2011 2011 Triumph Tiger 800 A08 2012 2012 Triumph Tiger 800 A08 2013 2013 Triumph Tiger 800 ABS A08 2011 2011 Triumph Tiger 800 ABS A08 2012 2012 Triumph Tiger 800 ABS A08 2013 2013 Triumph Tiger 800 ABS A08 2014 2014 Triumph Tiger 800 XC A08 2011 2011 Triumph Tiger 800 XC A08 2012 2012 Triumph Tiger 800 XC A08 2013 2013 Triumph Tiger 800 XC ABS A08 2011 2011 Triumph Tiger 800 XC ABS A08 2012 2012 Triumph Tiger 800 XC ABS A08 2013 2013 Triumph Tiger 800 XC ABS A08 2014 2014 Yamaha MT 125 RE114 2014 2014 Yamaha MT 125 RE114 2015 2015 Yamaha MT 125 RE114 2016 2016 Yamaha MT 125 A RE292 2017 2017 Yamaha MT 125 A RE292 2019 2019 Yamaha MT 125 A ABS RE115 2014 2014 Yamaha MT 125 A ABS RE115 2015 2015 Yamaha MT 125 A ABS RE115 2016 2016 Yamaha MT 125 A ABS RE292 2018 2018 Yamaha MT-07 RM17 2017 2017 Yamaha MT-09 RN435 2017 2017 Yamaha MT-09 RN435 2018 2018 Yamaha MT-09 2019 2019 Yamaha XSR 900 RN431 2016 2016 Yamaha XSR 900 RN431 2017 2017 Yamaha XSR 900 2018 2018 Yamaha XSR 900 2019 2019
Gilles brake lever FACTOR-X-LEVER
Gilles brake lever for various Aprilia, Ducati, Kawasaki, KTM and Triumph models. Optimal design for all brake styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
Gilles clutch lever FXL for Triumph
Optimal shape for all grip styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER pro X-Bar Cross Bar X00 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Drag Bar XD1 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike Flat XN1 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Black Bead-Shallow, Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Silver Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, Alu, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: aluminumColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light