Mirror
Available categories
Matching articles
Cover cap mirror hole / handlebar ends, black
Cover caps cover the original mirror mount and protect it from corrosion and refine the look on the handlebar. black 2-piece Ø=30mm, thread M6
Handlebar end mirror ACTION for Vespa left or right, black
Who does not like the original mirrors can replace them with Handlebar end mirrors ACTION exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. angular 120x48 mm Aluminum CNC milled black anodized Lever length 115mm to clamp end Glass tinted, blue without ABE Mounting information for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Handlebar end mirror AGILA for Vespa left or right, black
Who does not like the original mirrors can replace them with Handlebar end mirror AGILA exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and getting through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. oval Aluminum black for left or right side usable without E-mark Mounting information for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Handlebar end mirror Clubman for Vespa ET / LX / LXV /S / GTS / GTS Super / GTV / GTS HPE / GT
Now the classic, elegant Clubman mirror is also available for mounting on the handlebar end. It is clamped on the steering tube and can be mounted on the right and left. - Material: aluminum - Material treatment: anodized - Clamping: Ø25.4mm (1 inch) + adapter sleeve for Ø22.2mm - Position: mounting right and left possible - Mounting: Clamping on the handlebar or on suitable end piece- E-mark: no - One mirror included in delivery (for left and right 2x order)Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original handle bar ends the adapter 85.476010Mounting information for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW
Handlebar end mirror FERRARA 2 for Vespa left or right, black
Who does not like the original mirrors can replace them with Handlebar end mirror Ferrara 2 exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. 122 x 85 mm Aluminum black anodized Lever length 115 mm E-mark on glass usable for left or right side Mounting note for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Handlebar end mirror FERRARA 2 for Vespa, left or right, chrome
Who does not like the original mirrors can replace them with Handlebar end mirror Ferrara 2 exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. 122 x 85 mm Aluminum chrome Lever length 115 mm E-mark on glass usable for left or right side Mounting information for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Handlebar end mirror for Vespa left o. right, black, Highsider Enterprise EP1
Due to the elaborate CNC milled surface, the ENTERPRISE-EP1 looks very futuristic and there are many details reflected in the round shape of the ENTERPRISE-EP1 for the viewer.Handlebar end mirrors give motorcycles a very special look.For those who find NORMAL mirrors simply too unspectacular, the HIGHSIDER handlebar end mirror range has the solution.With short hanging handlebar end mirrors, many a well-behaved bike suddenly gets a slightly aggressive touch.The mirror can be used on the left or right and a joint on the mounting clamp provides individual adjustment options for the driver.Mountable either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror mount.With the highest level of quality and functionality, you can easily customize your bike to your liking with accessories from HIGHSIDER.A question of vision - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. So you can keep an overview.- Can be used for left and right side - Scope of delivery: 1 piece (for left and right 2 x order)- E-approved ✓Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original handle bar ends the adapter 85.476010Mounting information for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW Dimensions:A Width head: 100 mmB Height head: 100 mmC Width: 60-120 mmD Height: 150 mmStem length approx: 80 mmOutside diameter of the clamp 35 mmInner diameter: 29.9 mm
Handlebar end mirror for Vespa left o. right, black, Highsider Montana
Handlebar end mirrors for your VespaCharacter and overview - whether retro or modern. The Handlebar end mirrors for your Vespa are characterized by their design and aerodynamic function. This is circumspection in perfection.- Noble design, with a round head made of black shiny Aluminum. - For left and right side usable - Scope of delivery: 1 piece (for left and right 2 x order)- E-approved ✓Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original handle bar ends the adapter 85.476010Mounting information for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW Dimensions:Diameter: 102 mmStem length to bend: 70 mmStem length to clamp end: 115 mm
Handlebar end mirror for Vespa left o. right, black, Highsider Stealth X5
The characteristic stealth design known from the military stealth technology distinguishes the shapely and high-quality crafted mirror. Combined with the color matte black, the mirror head made of high-quality plastic with its angular elements has a striking appearance. Further visual accents can be found in the short mirror arm made of aluminum, which is equipped with three sporty air slits and offers additional adjustment options for a better view thanks to a joint on the clamp. Thanks to the use of lightweight materials, the STEALTH series from HIGHSIDER belongs to the weight class of flyweights. An adjustable joint provides additional adjustment possibilities of the STEALTH -X5.The mirror can be used on the left and right. Mountable either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror mount. (see accessories)Scope of delivery: 1 piece incl.- 1 X adapter 1 inch- 1 X adapter 7/8 inch- For left and right side usable - Scope of delivery: 1 piece (for left and right 2 x order)- E-approved ✓Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original handle bar ends the adapter 85.476010Mounting information for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW Dimensions:A Width head: 119 mmB Height head: 90 mmC Total width: 125 mmD Total height: 150 mmHandle length: 75 mmWeight: 130 g
Handlebar end mirror for Vespa left o. right, black, Highsider VICTORY-X
Handlebar end mirrors for your VespaCharacter and overview - whether retro or modern. The Handlebar end mirrors for your Vespa are characterized by their design and aerodynamic function. This is circumspection in perfection.- Noble design, with a round head made of black shiny Aluminum. - For left and right side usable - Scope of delivery: 1 piece (for left and right 2 x order)- E-approved ✓Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original handle bar ends the adapter 85.476010Mounting information for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW Dimensions:A: Width, head: 117 mmB: Height, head: 83 mmC: Width: 210 mmStem length center-center: 120 mmOutside diameter of the clamp: 37 mmHint: Tightening torque of M5 screw: 5-7 Nm
Handlebar end mirror for Vespa left o. right, chrome, Highsider Montana
Handlebar end mirrors for your VespaCharacter and overview - whether retro or modern. The Handlebar end mirrors for your Vespa are characterized by their design and aerodynamic function. This is circumspection in perfection.- Noble design, with a round head made of chrome-plated Aluminum. - For left and right side usable - Scope of delivery: 1 piece (for left and right 2 x order)- E-approved ✓Mounting info for Vespa GTS / GTS Super / GTV / GT /GT L: To mount the handlebar end mirrors, you need the adapter 165LVV02 or if you want to use the mirrors with the original bar ends the adapter 85.476010Mounting info for Vespa ET4 / LX / LXV / S / Primavera / Sprint: For mounting you need a handle with "handlebar end opening" or you have to cut the original one. For mounting you need the adapter: 165-LV4SW Dimensions:Diameter: 102 mmStem length to bend: 70 mmStem length to clamp end: 115 mm
Handlebar end mirror MINI for Vespa, right and left, black
If you don't like the original mirrors you can exchange them against the Handlebar end mirror mini exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. round Ø 82 mm Aluminum black Lever length 75mm Glass convex Mounting note for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Handlebar end mirror ZELIONI for Vespa, right and left, black anodized
Handlebar end mirror kit from ZELIONI. The kit contains 2 mirrors including mounting hardware for attachment to the handlebar end. round Ø 95 mm Lever length: 105mm to clamp end, Aluminum black anodized glare reducing blue tinted convex glass incl. mounting material E-mark on glass Tip: To close the original handlebar mirror mount, use the cover cap(item no. 40093110)
Handlebar end mirror ZELIONI for Vespa, right and left, black matt
Handlebar end mirror kit from ZELIONI. The kit contains 2 mirrors including mounting hardware for attachment to the handlebar end. round Ø 95 mm Lever length: 105mm to clamp end, Aluminum black matt glare reducing blue tinted convex glass incl. mounting material E-mark on glass Tip: To close the original handlebar mirror mount, use the cover cap(item no. 40093110)
Handlebar end mirror ZELIONI for Vespa, right and left, black matt
Handlebar end mirror kit from ZELIONI. The kit contains 2 mirrors including mounting hardware for attachment to the handlebar end. oval 135x75 mm Lever length: 105mm to clamp end, Aluminum black matt glare reducing blue tinted convex glass incl. mounting material without E-mark Tip: To close the original handlebar mirror mount, use the cover cap(item no. 40093110)
Handlebar end weights, black
Necessary for mounting MV handlebar end mirrors on Vespa ET/LX/LXV/S 50-150cc models with open handlebar end. Ø 11-24 mm black Scope of delivery: 1 pair including 3 adapter sets
Handlebar end weights, chrome
Necessary for mounting MV handlebar end mirrors on Vespa ET/LX/LXV/S 50-150cc models with open handlebar end. Ø 11-24 mm chrome Scope of delivery: 1 pair including 3 adapter sets
Lenkerendspiegel für Vespa links o. rechts, chrom, Highsider Montana
Lenkerendenspiegel für deine VespaCharakter und Überblick – ob retro oder modern. Die Lenkerendenspiegel für deine Vespa zeichnen sich durch charakteristisches Design und aerodynamische Funktion aus. Das ist Umsicht in Perfektion.- Edles Design, mit einem runden Kopf aus verchromten Aluminium. - Für linke und rechte Seite verwendbar - Lieferumfang: 1 Stück (für links und rechts 2 x Bestellen)- E-geprüft ✓Montageinfo für Vespa GTS / GTS Super / GTV / GT /GT L: Um die Lenkerendenspiegel zu montieren, benötigst du den Adapter 165LVV02 oder wenn du die Spiegel mit den originalen Lenkerenden verwenden willst den Adapter 85.476010Montageinfo für Vespa ET4 / LX / LXV / S / Primavera / Sprint: Zur Montage wird ein Griff mit „Lenkerenden Öffnung“ benötigt oder du musst den originalen aufschneiden. Zur Montage brauchst du den Adapter: 165-LV4SW Maße:Durchmesser: 102 mmStiellänge bis Knick: 70 mmStiellänge bis Schellenende: 115 mm
Lenkerendspiegel für Vespa links o. rechts, schwarz, Highsider Montana
Lenkerendenspiegel für deine VespaCharakter und Überblick – ob retro oder modern. Die Lenkerendenspiegel für deine Vespa zeichnen sich durch charakteristisches Design und aerodynamische Funktion aus. Das ist Umsicht in Perfektion.- Edles Design, mit einem runden Kopf aus schwarz glänzendem Aluminium. - Für linke und rechte Seite verwendbar - Lieferumfang: 1 Stück (für links und rechts 2 x Bestellen)- E-geprüft ✓Montageinfo für Vespa GTS / GTS Super / GTV / GT /GT L: Um die Lenkerendenspiegel zu montieren, benötigst du den Adapter 165LVV02 oder wenn du die Spiegel mit den originalen Lenkerenden verwenden willst den Adapter 85.476010Montageinfo für Vespa ET4 / LX / LXV / S / Primavera / Sprint: Zur Montage wird ein Griff mit „Lenkerenden Öffnung“ benötigt oder du musst den originalen aufschneiden. Zur Montage brauchst du den Adapter: 165-LV4SW Maße:Durchmesser: 102 mmStiellänge bis Knick: 70 mmStiellänge bis Schellenende: 115 mm
Lenkerendspiegel für Vespa links o. rechts, schwarz, Highsider Stealth X5
Das charakteristische Stealth Design bekannt aus der militärischen Tarnkappentechnik zeichnet den formschönen und hochwertig gearbeiteten Spiegel aus. Kombiniert mit der Farbe matt schwarz hat der Spiegelkopf aus hochwertigem Kunststoff mit seinen eckigen Elementen eine markante Ausstrahlung. Weitere visuelle Akzente befinden sich im kurzen Spiegelarm aus Aluminium, der mit drei sportiven Luftschlitzen versehen ist und durch ein Gelenk an der Schelle zusätzliche Einstellmöglichkeiten bietet für eine bessere Sicht. Dank der Verwendung von leichten Materialien gehört die STEALTH Serie von HIGHSIDER zur Gewichtsklasse der Fliegengewichte. Ein verstellbares Gelenk sorgt für zusätzliche Einstellmöglichkeiten des STEALTH -X5.Der Spiegel ist links und rechts verwendbar. Montierbar entweder mit den mitgelieferten Reduzierhülsen direkt am Lenkrohr oder an optional erhältliche Lenkerenden mit Lenkerendenspiegelaufnahme. (siehe Zubehör)Lieferumfang: 1 Stück inkl.- 1 X Adapter 1 Zoll- 1 X Adapter 7/8 Zoll- Für linke und rechte Seite verwendbar - Lieferumfang: 1 Stück (für links und rechts 2 x Bestellen)- E-geprüft ✓Montageinfo für Vespa GTS / GTS Super / GTV / GT /GT L: Um die Lenkerendenspiegel zu montieren, benötigst du den Adapter 165LVV02 oder wenn du die Spiegel mit den originalen Lenkerenden verwenden willst den Adapter 85.476010Montageinfo für Vespa ET4 / LX / LXV / S / Primavera / Sprint: Zur Montage wird ein Griff mit „Lenkerenden Öffnung“ benötigt oder du musst den originalen aufschneiden. Zur Montage brauchst du den Adapter: 165-LV4SW Maße:A Breite Kopf: 119 mmB Höhe Kopf: 90 mmC Gesamtbreite: 125 mmD Gesamthöhe: 150 mmStiellänge: 75 mmGewicht: 130 g
Lenkerendspiegel für Vespa links o. rechts, schwarz, Highsider VICTORY-X
Lenkerendenspiegel für deine VespaCharakter und Überblick – ob retro oder modern. Die Lenkerendenspiegel für deine Vespa zeichnen sich durch charakteristisches Design und aerodynamische Funktion aus. Das ist Umsicht in Perfektion.- Edles Design, mit einem runden Kopf aus schwarz glänzendem Aluminium. - Für linke und rechte Seite verwendbar - Lieferumfang: 1 Stück (für links und rechts 2 x Bestellen)- E-geprüft ✓Montageinfo für Vespa GTS / GTS Super / GTV / GT /GT L: Um die Lenkerendenspiegel zu montieren, benötigst du den Adapter 165LVV02 oder wenn du die Spiegel mit den originalen Lenkerenden verwenden willst den Adapter 85.476010Montageinfo für Vespa ET4 / LX / LXV / S / Primavera / Sprint: Zur Montage wird ein Griff mit „Lenkerenden Öffnung“ benötigt oder du musst den originalen aufschneiden. Zur Montage brauchst du den Adapter: 165-LV4SW Maße:A: Breite, Kopf: 117 mmB: Höhe, Kopf: 83 mmC: Breite: 210 mmStiellänge Mitte-Mitte: 120 mmAußendurchmesser der Klemmung: 37 mmHinweis: Anziehmoment der M5 Schraube: 5-7 Nm
Mirror adapter M8, left-hand thread, right or left
For mounting the mirrors may need to order a suitable mirror adapter . The threaded bolt has an M8 thread for screwing to your machine. Suitable for right and left side, for all mirrors that have an M8 female thread in the stem. Before ordering please check thread of mirror and adapter. (M8/M10) M8 x1,25 mm Left thread
Mirror adapter M8, right-hand thread, right or left
For mounting the mirrors may need to order a suitable mirror adapter . The threaded bolt has an M8 thread for screwing to your machine. Suitable for right and left side, for all mirrors that have an M8 female thread in the stem. Before ordering please check thread of mirror and adapter. (M8/M10) M8 x1,25 mm Right-hand thread
Mirror hole cover left & right for Vespa, chrome
When installing handlebar end mirrors, the mirror holes in the handlebar cover should be sealed. The covers for the mirror hole offer an optimum solution for this. Chrome Pair Ø=30mm, M6 thread