Filter by motorcycle model:
Barracuda Blinker S-LED 3 B-LUX mit integriertem Rück- und Bremslicht schwarz
Barracuda Blinker S-LED 3 B-LUX mit integriertem Rück- und Bremslicht schwarz Barracuda Blinker S-LED 3 B-LUX, mit integriertem Rück- und Bremslicht, Aluminium schwarz eloxiert, universal verwendbar, Leistung 1 Watt, mit LEDs, mit E-Zeichen, Montagegewinde M8, Lieferung paarweise Produktkennzeichnung: Barracuda Beleuchtung Produkt Typ: Barracuda Blinker S-LED 3 B-LUX Blinker Rücklicht
Barracuda LED Blinker FRECCIA, universal
Barracuda LED Blinker FRECCIA, universal Barracuda Blinker FRECCIA, ABS Kunststoff, Farbe schwarz, universal verwendbar, Leistung 1 Watt, mit 16 LEDs, mit E-Zeichen, Montagegewinde M10, Lieferung paarweise Produktkennzeichnung: Barracuda Beleuchtung Hinweis: - Motorräder mit 10 Watt Blinkerglühbirnen benötigen die 10 Watt Widerstände, um die Blinkfrequenz auszugleichen (Art.nr. BC-RES10) - Motorräder mit 21 Watt Blinkerglühbirnen benötigt die 21 Watt Widerstände, um die Blinkfrequenz auszugleichen (Art.nr. BC-RES21) - Motorräder mit originalem LED System benötigen keine Widerstände. Produkt Typ: Barracuda Blinker FRECCIA Lieferumfang: 1 Satz = 2 Stück
Barracuda sequential blinker SQ-LED B-LUX red
Barracuda sequential blinker SQ-LED B-LUX, aluminum housing, color red, universal use, running light blinker, with LEDs, with E-mark, mounting thread M8, supplied in pairs. The SQ-LED B-LUX is an E-approved LED running light blinker with approval for front and rear. The housing of the basic version is made of high-quality ABS. The SQ-LED B-LUX is characterized by its futuristic shape. The latest generation of these indicators have the best LEDs currently available on the market and are also supplied with a special optical glass, which further increases the beam angle and thus visibility. The blinker has a consumption of 1W. The price refers to the set (2 pieces).BARRACUDA's LED indicators are universal and compatible with most motorcycles on the market. Each motorcycle has different light sources and may therefore require resistors.- Motorcycles with 10 watt blinker bulbs require the 10 watt resistors to equalize the flashing frequency (art. no. BC-RES10)- Motorcycles with 21 watt blinker bulbs require the 21 watt resistors to equalize the flashing frequency (art. no. BC-RES21)- Motorcycles with original LED system do not require resistors.This applies to 99% of all motorcycles on the current market. However, as always, there are exceptions.We recommend the following accessories (see "Accessories" tab) to ensure trouble-free installation of BARRACUDA motorcycle LED indicators:- Turn signal adapters: these enable trouble-free installation in the original openings of the fairing- BARRACUDA resistors for adjusting the flashing sequence- Turn signal adapter cables: are required to connect Barracuda turn signals to your vehicle. These adapters allow you to fit the indicators without having to make any changes to the vehicle or cut the wiring harness.- LED flasher relay (item no. BC-N1003-0)
Barracuda sequential blinker SQ-LED BASIC
Barracuda sequential blinker SQ-LED Basic, ABS plastic, color black, universal use, running light blinker, with LEDs, with E-mark, mounting thread M8, supplied in pairs The SQ-LED Basic is an E-approved LED running light blinker with approval for front and rear. The housing of the basic version is made of high-quality ABS. The SQ-LED Basic is characterized by its futuristic shape. The latest generation of these indicators have the best LEDs currently available on the market and are also supplied with a special optical glass, which further increases the beam angle and therefore visibility. The blinker has a consumption of 1W. The price refers to the set (2 pieces).BARRACUDA's LED indicators are universal and compatible with most motorcycles on the market. Each motorcycle has different light sources and may therefore require resistors.- Motorcycles with 10 watt blinker bulbs require the 10 watt resistors to equalize the flashing frequency (art. no. BC-RES10)- Motorcycles with 21 watt blinker bulbs require the 21 watt resistors to equalize the flashing frequency (art. no. BC-RES21)- Motorcycles with original LED system do not require resistors.This applies to 99% of all motorcycles on the current market. However, as always, there are exceptions.We recommend the following accessories for trouble-free installation of BARRACUDA motorcycle LED indicators (see "Accessories" tab):- Turn signal adapters: these enable problem-free installation in the original openings of the fairing- BARRACUDA resistors for adjusting the flashing sequence- Turn signal adapter cables: are required to connect Barracuda turn signals to your vehicle. These adapters allow you to fit the indicators without having to make any changes to the vehicle or cut the wiring harness.- LED flasher relay (item no. BC-N1003-0)
Barracuda sequentieller Blinker SQ-LED B-LUX grün
Barracuda sequentieller Blinker SQ-LED B-LUX grün Barracuda sequentieller Blinker SQ-LED B-LUX, Aluminiumgehäuse, Farbe grün, universal verwendbar, Lauflichtblinker, mit LEDs, mit E-Prüfzeichen, Montagegewinde M8, Lieferung paarweise Produktkennzeichnung: Barracuda Beleuchtung Produkt Typ: Barracuda Blinker SQ-LED B-LUX
Barracuda turn signal S-LED B-LUX red
Barracuda turn signal S-LED B-LUX, ABS plastic and aluminum, color red, universal use, power 1 watt, with LEDs, with E-mark, mounting thread M8, supplied in pairs The BARRACUDA turn signal S-LED B-LUX is E-tested with approval for front and rear. All variants are made of aluminum and are offered in different colors. The latest generation of these turn signals is also supplied with a special optical glass, which additionally increases the beam angle and thus the visibility. The innovative You-Design concept allows an individual color design, perfectly matched to each bike. The turn signals are available in many different colors. The turn signal has a consumption of 1W. The price refers to the set (2 pieces).BARRACUDA's LED turn signals are universal and compatible with most motorcycles on the market. Each motorcycle has different bulbs and therefore may need resistors.- Motorcycles with 10 watt turn signal bulbs need the 10 watt resistors to balance the flashing frequency (part no. BC-RES10)- Motorcycles with 21 watt turn signal bulbs need the 21 watt resistors to balance the flashing frequency (part no. BC-RES21)- Motorcycles with original LED system do not need resistors.This is true for 99% of all motorcycles on the current market. But there are, as always, exceptions.For a smooth installation of the BARRACUDA motorcycle LED turn signals we recommend the following accessories (see tab "Additional items"):- Turn signal adapters: these allow easy installation in the original openings of the fairing- BARRACUDA resistors to adjust the flashing sequence- Turn signal adapter cables: are needed to connect Barracuda turn signals to your vehicle. With these adapters you can install the turn signals without having to make any changes to the vehicle or cut the wiring harness.
HIGHSIDER Pro Akron-Flash LED Bar End Indicator Housing Black / Lens Orange (Pair), Front
HIGHSIDER AKRON-FLASH LED handlebar end indicators, E-approved as front direction indicator - attractive handlebar end with flashing function - With these handlebar end indicators, HIGHSIDER once again demonstrates a real flair for outstanding design and top functionality. The ultra-bright, adjustable flashing angle indicator lights of the latest generation from HIGHSIDER provide unmistakable directional indication. The handlebar end indicators with tinted glass, high-quality CNC-milled aluminum housing and characteristic cap are simply beautiful. Packaged so harmoniously, the front direction indicators literally disappear from the vehicle when not in use. Easy to fit thanks to the clamping system with various sleeves. Universal fit for 7/8, 1 inch or X-Bar tubular handlebars with an inner diameter of 12 to 22 mm. The cables are routed in the handlebars and are a good length at approx. 100 cm. Look forward to the HIGHSIDER AKRON-FLASH LED handlebar end indicators, which are by no means commonplace. Make your mark - with the innovative blinker series from HIGHSIDER, you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:Width: 36 mmDiameter: 34.5 mmCable length: approx. 1000 mm Angle of the light modules continuously adjustable by 26°. Connections: Power consumption: 13.5 V, 0.26 A, 3.5W Yellow cable = blinker (+) Black cable = earth (-) Scope of delivery: 1 pair 2 x clamping sleeves Ø 13 mm, Ø 16 mm3 x centering ring2 x central screw M6 with fastening ring for the HIGHSIDER AKRON-FLASH, and cone nut M6. Note: Resistors or a flasher relay may be required for correct flashing.
HIGHSIDER Pro Akron-Flash LED Bar End Indicator Housing Black-Titanium / Lens Orange (Pair), Front
HIGHSIDER AKRON-FLASH LED handlebar end indicators, E-approved as front direction indicator - attractive handlebar end with flashing function - With these handlebar end indicators, HIGHSIDER once again demonstrates a real flair for outstanding design and top functionality. The ultra-bright, adjustable flashing angle indicator lights of the latest generation from HIGHSIDER provide unmistakable directional indication. The handlebar end indicators with tinted glass, high-quality CNC-milled aluminum housing and characteristic cap are simply beautiful. Packaged so harmoniously, the front direction indicators literally disappear from the vehicle when not in use. Easy to fit thanks to the clamping system with various sleeves. Universal fit for 7/8, 1 inch or X-Bar tubular handlebars with an inner diameter of 12 to 22 mm. The cables are routed in the handlebars and are a good length at approx. 100 cm. Look forward to the HIGHSIDER AKRON-FLASH LED handlebar end indicators, which are by no means commonplace. Make your mark - with the innovative blinker series from HIGHSIDER, you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:Width: 36 mmDiameter: 34.5 mmCable length: approx. 1000 mm Angle of the light modules continuously adjustable by 26°. Connections: Power consumption: 13.5 V, 0.26 A, 3.5W Yellow cable = blinker (+) Black cable = earth (-) Scope of delivery: 1 pair 2 x clamping sleeves Ø 13 mm, Ø 16 mm3 x centering ring2 x central screw M6 with fastening ring for the HIGHSIDER AKRON-FLASH, and cone nut M6. Note: Resistors or a flasher relay may be required for correct flashing.
HIGHSIDER Pro Akron-X LED Mini Indicator Housing Black / Lens Clear (Pair), Front & Rear
HIGHSIDER AKRON-X LED blinker- Timelessly elegant look, state-of-the-art technology - Flowing shapes and perfect transitions characterize the appearance of the HIGHSIDER AKRON-X, which is also just the right size. The light of the HIGHSIDER AKRON-X makes an unmistakable statement about where it is going. The two powerful SMDs show their best side with this beautifully designed attachment with tinted reflector. Equipped with a particularly attractive light pattern, the direction indicator shines and flashes brightly and strongly. Look forward to this elegant direction indicator, whose form and function merge wonderfully. Be seen with safety - the blinker series from HIGHSIDER give you the safety you need and the look you want - whether you're a café racer, chopper or naked bike. Dimensions: A Diameter: 40 mm D Depth: 45 mm Thread: M8, length 20 mmStem approx.: 15 mmConnections: Yellow = blinker (+) Black = ground (-) Scope of delivery: 1 pair
HIGHSIDER Pro Akron-X LED Mini Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER AKRON-X LED blinker- Timelessly elegant look, state-of-the-art technology - Flowing shapes and perfect transitions characterize the appearance of the HIGHSIDER AKRON-X, which is also just the right size. The light of the HIGHSIDER AKRON-X makes an unmistakable statement about where it is going. The two powerful SMDs show their best side with this beautifully designed attachment with tinted reflector. Equipped with a particularly attractive light pattern, the direction indicator shines and flashes brightly and strongly. Look forward to this elegant direction indicator, whose form and function merge wonderfully. Be seen with safety - the blinker series from HIGHSIDER give you the safety you need and the look you want - whether you're a café racer, chopper or naked bike. Dimensions: A Diameter: 40 mm D Depth: 45 mm Thread: M8, length 20 mmStem approx.: 15 mmConnections: Yellow = blinker (+) Black = ground (-) Scope of delivery: 1 pair
HIGHSIDER pro Apollo Bullet LED rear light, brake light, blinker black/toned 3in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 3in1 LED rear light, brake light, blinker, for rear E-approved. LED rear light, brake light, blinker unit in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Saving the best for last - be seen in safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster Dimensions:A: 22 mmB :34 mmD: 40 mmThreaded bolt: M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+) Scope of delivery: 1 pair
HIGHSIDER Pro Apollo Bullet LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO BULLET LED indicators, for front and rear E-approved. Power LED blinker in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 22 mmB: 34 mmD: 40 mm Threaded bolt M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = blinker (+) Scope of delivery: 1 pair Note: E-approved for front and rear. Can be ordered as an option:HIGHSIDER Rear light/indicator APOLLO BULLET, article no. 254-171HIGHSIDER Indicator/position light APOLLO BULLET, article no. 204-173
HIGHSIDER Pro Apollo Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER Pro Apollo Classic LED Indicator housing chrome / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER Pro Apollo LED blinker module housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO MODUL LED blinker, E-approved for front and rearLED blinker module suitable for installation or mounting, black aluminum ring with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. This module is supplied with a black anodized aluminium ring that fits over the base body. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A1: 13 mm A2: 9 mm D1: 22 mmD2: 20 mmThreaded bolt: M8, length: 12 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairNote:The unit can be installed flat without the aluminum ring, so that only the lens is visible. A 20 mm hole must be drilled for this.Alternatively, the unit can be mounted with the aluminum ring on a mounting plate on the vehicle, for example, see instructions.
HIGHSIDER Pro Blaze LED turn signal housing black / lens clear (pair), front & rear
HIGHSIDER pro BLAZE LED turn signal The BLAZE model combines powerful LED technology with a modern design. The clear glass blends in well with the high-quality, chrome-plated metal housing. The indicators contain small, waterproof plugs and a rubber stem, E-tested. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Technical data Metal housing: Width: 39.5 Height: 19.5 mm Depth: 21 mm Handle: Rubber length: 15 mm Threaded bolt: M8 x 20 mm Connections: Black cable = ground (-) Red cable = blinker (+) Power consumption: 2.16 W at 13.5 V Scope of delivery: 1 pair
HIGHSIDER Pro Bronx-MX LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER BRONX-MX LED blinker, E-approved.Slim, stylish, with a CNC-milled housing. This is how the HIGHSIDER BRONX-MX LED blinker presents itself. A particularly attractive light pattern is shown at its best with these beautifully shaped add-on parts. In the right direction ? with the innovative blinker series from HIGHSIDER you not only show where you want to go, but also who you are. This is trend-setting design at its best.Dimensions: A Width: 40 mmC Height: 12 mm D Depth: 15 mm Threaded bolt: M8 x 16mmConnections:Yellow = blinker (+)Black = ground (-)Power consumption at 13.5V: 0.154A, 2.1 wattsScope of delivery: 1 pair
HIGHSIDER Pro Classic-X1 LED Indicator Housing Silver / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER LED blinker CLASSIC-X1, E-approved - Form and function wonderfully fused together. - A new attractive blinker shape to personalize your vehicle. With their unusual design, the indicators match the look of many motorcycles such as café racers, choppers or naked bikes. The CLASSIC-X1 blends harmoniously into the overall look of your motorcycle. These beautifully designed LED indicators really pack a punch. High-quality aluminum housing in a small, classic shape and particularly bright thanks to SMD technology. Two powerful SMDs provide an unmistakable direction indicator. Look forward to these classically shaped direction indicators with tinted reflector, in silver and anodized black satin finish. Show your way - with the innovative blinker series from HIGHSIDER you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions: A Diameter: 37 mm B Width: 47 mm D Depth: 41 mm Thread: M8 Thread length: 20 mm Weight: 64 g Connections: Yellow = blinker (+) Black = ground (-) Scope of delivery: 1 pair
HIGHSIDER Pro Conero LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER CONERO LED indicators, for front and rear E-approved. High luminosity thanks to the latest COB technology (Chip On Board): The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs despite the heavily tinted glass. The black, cylindrical aluminum housing and the polished bevels characterize the elegant, stylish design of this model. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 45 mmD: 15 mmThreaded bolt: M 8x 1.25Connections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the HIGHSIDER CONERO seriesYour bike - your project: Make your naked bike an individual highlight with our HIGHSIDER CONERO products - expressive, rich in contrast and perfect in form!
HIGHSIDER Pro Enterprise LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER ENTERPRISE-EP1 LED indicators, E-approved for front and rear. - Accessory indicators, infinite widths! - NEW in the HIGHSIDER universe: The futuristic HIGHSIDER ENTERPRISE-EP1 series with a special design. The elaborately CNC-milled surface gives the HIGHSIDER ENTERPRISE-EP1 a very futuristic look, reflecting many details in its round shape. This makes the HIGHSIDER ENTERPRISE-EP1 a real eye-catcher. In the right direction - with the innovative blinker series from HIGHSIDER, you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions: A Diameter: 30 mm B Width: 48 mm D Depth: 34 mm Stem length: 20 mm Threaded bolt: M8 x 1.25, length 17 mm Power consumption:At 12 V, 0.16 A, 1.92 W Connections:Yellow = blinker (+) Black = earth (-) Scope of delivery: 1 pair
HIGHSIDER Pro Esagano-RS LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER ESAGANO-RS LED indicators, E-approved Rising and flat trapezoids form the basic shape of the CNC-machined aluminum HIGHSIDER ESAGANO-RS indicators and create a futuristic design that symbolizes the design language of modern motorcycles. The striking housing skilfully continues the design language of the ESAGANO product family and creates a unique recognition value. The bead-blasted and matt black anodized aluminium surface completes the picture. The flat LED module with its built-in LEDs creates a visually and functionally convincing light pattern so that you can be seen clearly. Be seen with safety - with the indicators from HIGHSIDER you get the necessary safety you need thanks to the latest technology, a striking design that completes your motorcycle and skillfully sets the scene. Dimensions: B Width: 44 mm C Height: 11 mm D Depth: 18 mm Thread: 16 mm, M8x1.25 threaded bolt Connections: Yellow = blinker (+) Black = ground (-) Scope of delivery: 1 pair of LED indicators
HIGHSIDER Pro Flight LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER LED blinker FLIGHTThe blinker with the high-quality aluminum housing impresses with its unusual design. The tinted glass inserted flush into the CNC-milled housing gives an angular and compact impression when viewed from the front. The back, on the other hand, is dominated by soft curves that emphasize the sporty character of the FLIGHT. The flexible rubber stem blends seamlessly into the black housing. Modern LEDs in SMD design ensure outstanding luminosity and make the FLIGHT blinker a real eye-catcher! E-approved for use as a front and rear blinker. Caution with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview.Dimensions: A: 30 mm B: 41 mm (rubber stem 11 mm) C: 16.5 mm D: 22 mm Threaded bolt: M8 x 19 mmConnections: Yellow cable = blinker (+) Black cable = earth (-) Scope of delivery: 1 pair
HIGHSIDER pro Handlebar End Mirror Tetra Black With LED Indicator (1pc.)
HIGHSIDER TETRA handlebar end mirror with LED indicators, bead-blasted black satin finish, E-approved - My rear-view mirror, it has three corners ... - In the shape of a triangle, the HIGHSIDER TETRA handlebar end mirror scores points with its cheeky design and creates variety. With this unusual handlebar end mirror, you can customize the details of your bike to your liking. It emphasizes your style, looks modern and individual at the same time. The mirror arm design with fully recessed blinker stands confidently in the wind. The bar end system has a striking design and can be extended with the optional Design Cap1 for an even more individual appearance. The black anodized aluminium, finely bead-blasted, underlines the high-quality look. In terms of technology, the developers have opted for evolution and have provided a powerful clamping function and adjustability for the mirror arm with integrated LED lighting. With 4 easy-to-reach screws, the direction indicator can be aligned for a wide range of handlebar types in compliance with ECE regulations. Suitable for modern motorcycles with an inner handlebar diameter of 12-22 mm, i.e. for most 7/8 and 1 inch aluminum or steel handlebars. Can be used both left and right. Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. This is prudence in perfection. Dimensions: A Head width: 122 mm B Head height: 122 mm C Total width: 87 mm D Overall height: 185 mm Handle length: 115 mm Cable length: 1000 mm Weight: 354 g Scope of delivery: 1 piece 1x clamping sleeves each with Ø 12 and 16 mm 1x spacer sleeves each with Ø 14, 18 and 22 mm 1 x M6 conical nut NOTE: Handlebar end mirrors with LED indicators are fitted in pairs. This is a piece sale, so put two products in the shopping cart. Make sure that the direction indicators are parallel to the vehicle in the direction of travel and facing forwards in relation to the ground to ensure ECE-compliant illumination. Mirrors and indicators are E-approved, no entry in the vehicle documents or carrying of any documents is necessary.
HIGHSIDER Pro Little Bronx LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER LED blinker LITTLE BRONX with tinted glass, E-approved- Stylish and compact with high luminosity -Whether discreet in black, elegant in gold or decorative in red, no matter which color variant you choose, with the LITTLE BRONX you are guaranteed attention thanks to the extremely bright SMD technology. Clear lines, clear shape: The finely sandblasted, CNC-milled aluminum housing offers you just that. This is design in the truest sense of the word - DIRECTIONAL. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:A Width: 26 mmC Height: 12 mmD Depth: 15 mmThreaded bolt: M8 x 16 mmConnections: Yellow = blinker (+)Black = ground (-)Scope of delivery: 1 pair