Filter by motorcycle model:
Auxiliary headlamp High Beam - Barracuda
The BARRACUDA HIGH BEAM is homologated for road use and has E-mark. It features LED technology, optical lenses distribute the light optimally. In its function as an additional high beam, it significantly increases the field of view. The headlight is characterized by the typical BARRACUDA design and minimal dimensions (outer diameter 5.6 cm). Complete with universal mounting bracket with side joint made of CNC aluminum in satin black color.
Auxiliary headlight for Moto Guzzi V7 Stone Special Edition (22-) Hepco & Becker
Auxiliary headlight for Moto Guzzi V7 Stone Special Edition (22-) Hepco & Becker
Auxiliary headlight for Moto Guzzi V85 TT Hepco & Becker
E-Pruefzeichen (no registration necessary)Improved light conditions in road trafficRobust aluminum housing, blackComplete headlight kit with two headlights, switch, wiring harness, mounting hardware and housing protectorLamps can be switched on manuallypowder coated surface finish12V - 8,6W, 770lmMounting by means of enclosed model specific bracket especially for this motorcycle model. See instructionsRegulations according to §50 StVZOAdditional lights may be mounted at a maximum distance of 250mm from the center of the vehicle and at a maximum height of the main headlight. Under this condition, it is also permissible to mount them on the crash bar, which provides more effective illumination.Our headlights can be operated as fog lights or as additional high beams.It should be noted here:While there is no restriction on the number of fog lights permitted, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the limiting or dipped beam light.For these reasons, Hepco & Becker offers sets with 2 headlights as fog lights, which are switched with their own switch.The headlights must have the E-mark in order to be operated.Our LED Flooters have a corresponding certification mark and are therefore registration-free.Detailed mounting instructions with wiring diagram are included with the flooters. Everything is pre-assembled, without soldering work. Cutting of cables is not necessary.The on/off switch is attached to the dashboard/handlebar.The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled.We recommend a visit to a specialist workshop for installation.
Auxiliary headlight for Moto Guzzi V85 TT Hepco & Becker
E-mark (no registration necessary)Improved lighting conditions in road trafficRobust aluminum housing, blackComplete headlight set with two headlights, switch, wiring harness, mounting material and housing protectionLamps can be switched on manuallypowder-coated surface finish12V - 8.6W, 770lmMounted using the enclosed model-specific bracket especially for this motorcycle model. See instructionsRegulations according to §50 StVZOAdditional lights may be mounted at a maximum distance of 250mm from the center of the vehicle and at a maximum height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination.Our headlights can be operated as fog lights or as additional high beams.Please note here:While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlamp. Operation as a fog light can be switched with the marker light or dipped beam.For these reasons, Hepco & Becker offers sets with 2 headlights as fog lights, which are operated with their own switch.The headlights must have the E-mark in order to be operated.Our LED Flooters have a corresponding test mark and are therefore registration-free.Detailed installation instructions with wiring diagram are included with the flooters. Everything is pre-assembled, without soldering work. It is not necessary to cut any cables.The on/off switch is attached to the fittings/handlebars.The headlights must be adjusted during a test ride in the dark so that other road users are not dazzled.We recommend visiting a specialist workshop for installation.
Fog auxiliary headlight LED for KLZ 1000/SE Versys (Bj.19-) Original Kawasaki
LED fog auxiliary headlights for even more visibility. With road approval.
Halogen auxiliary lighting for enduros
Pair of additional universal headlights with E11 - EC approval WR-CS Ø 22mm - 25mmAdditional universal headlights, homologated, which are easy to mount on crash bars or similar with a tube diameter of 21mm - 25mm. The set includes cable set, relay and fuse for direct connection to the battery. Also included is a waterproof switch, which can be mounted on the handlebars and the cable to connect to the ignition.
HIGHSIDER pro 5 3/4 inch Type 12 LED headlight insert With daytime running light
HIGHSIDER TYPE 12 LED headlight insert, round with chrome-plated reflector and black cover, 5 3/4 inch, E-approvedHigh beam, low beam, parking light and daytime running light function.Dimensions:Ø A = 145 mmØ GA = 133 mmØ I = 129 mmT = 70 mmR = 10 mmWeight: 650 gConnections:(3 pin plug) Red = low beam (+) White = high beam (+) Black = ground (-) Blue = TFL (+) Brown = position light (+) Cable length: 300 mm Scope of delivery:1 x LED headlight insert1 x connector housing
HIGHSIDER pro CB1 DRL Control Box Switchable daytime running light
HIGHSIDER DRL CONTROL- BOX CB1Daytime running light control box for vehicles without light switchInstalling the DRL CONTROL- BOX CB1 ensures correct switching between the daytime running lights and the lights at the front of the vehicle. According to regulations, the daytime running lights must be connected in such a way that they go out automatically when the main headlights are switched on. As the main headlights are always on in vehicles without a light switch, the daytime running light function cannot be used correctly. The BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle electrics. The parking light function, which is switched via the ignition lock when the vehicle is parked, is fully functional.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions Length: 48 mmWidth: 28 mm Height: 14 mm Assignment:IN (vehicle electrics):Yellow = high beam (+)Blue = low beam (+) ON / OFF switch betweenWhite = parking light (+)Red = ignition 15 (+)Black = earth (-)OUT (headlights)Yellow = high beam (+)Blue = low beam (+)Black = earth (-)To the daytime running light:White = parking light (+)Red = daytime running light (+)Scope of delivery: 1 pieceOptional accessories:Light switch on/offNOTE:A separate ON and OFF switch is also required for the DRL CONTROL-BOX (not included). The rear tail light must always remain switched on, i.e. set to ignition plus.If this product, in conjunction with the TYPE 6 headlight, does not switch on the daytime running light after starting the engine, please proceed as follows:Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.Tip:You can find an installation tutorial on YouTube in our channel (HIGHSIDER Tips & Tricks). Link: https://www.youtube.com/watch?v=XC85w-0orc8
HIGHSIDER pro DRL Touch E-Box daytime running light control via push-button
HIGHSIDER E-BOX DRL TOUCH, for TFL switching via push-button, 20 poles. For switching between daytime running light and low beam. The HIGHSIDER E-BOX DRL TOUCH can switch the low beam on or off with the aid of a push-button switch (not included in the scope of delivery). Dimensions: Height: 16 mm Width: 56.5 mm Width with mounting brackets: 75 mm Length: 48 mm Fixing lugs: 3 mm x 11 mm (slotted hole) Weight: 0.046 kg Cable length: 400 mm Scope of delivery: 1 x HIGHSIDER E-BOX DRL TOUCH 1 x cable set 1 x capacitor 1x manual
HIGHSIDER pro LED daytime running light black round (1pc)
HIGHSIDER LED daytime running light, E-approvedThe LED daytime running light with 4 LEDs is installed in a round, black-painted aluminum housing. The powerful LEDs significantly increase the perception of motorcyclists by other road users. See and be seen - give your bike personality! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a sensational highlight! Dimensions:Diameter: 71.5 mmDepth: 47.5 mm Technical specifications:Power consumption at 12.5 volts: only 0.2 amps (approx. 2.5 watts)Luminous flux at 12 volts: 150 lumens Connections:Black cable: earth (-)Red cable = plus (+), is connected to switched plus (ignition).White cable = control cable to parking light Scope of delivery: 1 piece NOTE 1 - WITH existing light switch:A manually switched low beam (light switch) is a prerequisite for operating the daytime running lights (TFL), as otherwise the function of the TFL would be canceled.According to road traffic regulations, the TFL must be connected so that it goes out when the main headlight is switched on.(exception: actuating the headlight flasher). The rear tail light must always remain switched on, i.e. set to ignition plus. NOTE 2 - WITHOUT existing light switch:The daytime running light can also be used on vehicles without a light switch. The following components are required for this:Switch: Art. No. 240-044HIGHSIDER DRL CONTROL- BOX CB1: Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER pro LED daytime running light black With parking light function (1pc)
HIGHSIDER LED daytime running lightThe LED daytime running light with 4 power LEDs and parking light function ensures that bikers are clearly visible to other road users. Packaged in a matt black, rectangular aluminum housing, the daytime running light is designed for universal mounting. With this daytime running light, the light switches to dimmed parking light mode when switching to low beam, E-approved.See and be seen - give your bike personality! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a eye-catching highlight!Dimensions:Width: 150 mmHeight: 38 mmDepth: 39.5 mmTechnical specifications:Current consumption at 12.5 volts: max. 0.4 amps (corresponds to approx. 5 watts)Luminous flux at 12 volts: 250 lumens Connections:Black cable: earth (-)Red cable = plus (+), is connected to switched on plus (ignition). White cable = is connected to the control cable of the low beam.Scope of delivery: 1 pieceNote 1 - with existing light switch:Operation of the HIGHSIDER LED daytime running light requires a manually switched low beam via a light switch. The daytime running light must be connected in such a way that it goes out when the main headlight is switched on (exception: actuating the headlight flasher). The rear tail light must always remain switched on, i.e. set to ignition plus.Attention: Any other parking lights on the vehicle must be disconnected, as a maximum of 2 parking lights may be used on the vehicle.Note 2 - without existing light switch:The daytime running light can also be used on vehicles without a light switch. The following components are required for this:Switch: Art. No. 240-044HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER smart Holder Silver For auxiliary headlights (1pc)
HIGHSIDER smart universal bracket for mounting a 3 1/2 or 4 1/2 inch headlight on the lower triple clampDimensions:approx. W 113x H 80, 6mm thick. Plate has a slight bend in the middle.Holes: Top 2 slotted holes each approx. 8mm diameter x 32mm long, distance 20-85mmCenter 2x Ø 9mm distance approx. 40mm (hole center-hole center)Bottom slotted hole approx. 11x22mm
Installation kit LED auxiliary headlight for Moto Guzzi V100 Mandello / Stelvio
For use with the LED auxiliary headlights.
Kellermann daytime running light with position light and turn signal, Dayron, aluminum, LED, front, 12 V, matt black
Kellermann daytime running light with position light and turn signal Dayron I ECE approved for front Increased visibility for more safety Replaces the existing daytime running light as well as position light & turn signal if necessary Automatic switching of daytime running light to position light when low beam is activated Automatic deactivation of daytime running light/position light during turn signal operation Unique brilliant illuminated area with outstanding new lens technology Extreme light output Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330kHz clocked Flow optimized aluminum housing Suitable for 12 Volt DC vehicle electrical systems With M8 x 20mm mounting adapter Globally protected design Main material: aluminumColor: blackComponent lighting: daytime running light with position light and turn signalOptical characteristic: mattShape: roundPosition: frontExpert opinion: E-approvedTurn signal model: DayronBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann daytime running light with position light, Dayron, aluminum, LED, VR/VL, 12 V, matt black
Kellermann daytime running light with position light Dayron Increased visibility for more safety Replaces the existing daytime running light as well as position light & turn signal if applicable Automatic switching of daytime running light to position light when dipped beam is activated Automatic deactivation of daytime running light/position light during turn signal operation Unique brilliant illuminated area with outstanding new lens technology Extreme light output Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330kHz clocked Flow optimized aluminum housing Suitable for 12 Volt DC vehicle electrical systems With M8 x 20mm mounting adapter Globally protected design Main material: aluminumColor: blackComponent lighting: daytime running light with position lightOptical property: mattShape: roundPosition: front left or rightExpert opinion: E-approvedTurn signal model: DayronBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
KTM auxiliary headlight kit
Each headlight 8 watts power consumption and 4400cd luminous intensity Optimal illumination of the road due to the wide beam angle Increased safety when driving at night Housing made of plastic and black powder-coated aluminum Small size: 70mm x 61mm diameter One headlight weighs 485g Optional USB charging port can be mounted on the relay mounting plate
KTM auxiliary headlight kit for Super Adventure S / R (Bj.17-)
Each headlight 8 watts power consumption and 4400cd luminous intensity Optimal illumination of the road due to the wide beam angle Increased safety when driving at night Housing made of plastic and black powder-coated aluminum Small size: 70mm x 61mm diameter One headlight weighs only 485g
LED auxiliary headlight for Moto Guzzi V100 Mandello / Stelvio
For more visibility and safety on dark days and when driving at night. An installation kit is required for mounting, this is available separately (see accessories)
LED auxiliary headlight Nova incl. universal mounting for tube Ø18-25mm Hepco & Becker
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.The brand new Nova LED auxiliary headlight - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be added flexibly via the switch on the handlebars Additional information: Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams. Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings. The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this. Note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
LED auxiliary headlight Nova incl. universal mounting for tube Ø25-32mm Hepco & Becker
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.The brand new Nova LED auxiliary headlight - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø25mm - Ø32mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be added flexibly via the switch on the handlebars Additional information: Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams. Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings. The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this. Note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
LED auxiliary headlight Versys650 2017 Original Kawasaki
LED auxiliary headlights for better seeing and being seen.ATTENTION! additional relay required!
LED auxiliary headlights (set) incl. universal mounting set for BMW F 850 GS (Bj.18-) Original Hepco
Fog light for individual mounting. Incl. wiring harness and mounting clamps. 3 High Power LEDs, 12V E-mark (no registration necessary) Improved lighting conditions in road traffic Robust aluminum housing, black Complete headlight set with two headlights, switch, wiring harness, mounting hardware and housing protector Lamps can be individually switched separately powder-coated Universal mounting options: Tube clamps for tube thicknesses ø22 - ø 47mm Horizontal or vertical mounting possible Universal design: Part No.: HB731106 Thanks to adjustable clamps and various inserts, the new LED Flooter (and the Ion Blue Flooter) offer mounting options on tubes from 22 to 47mm. 12V - 8.6W, 770lm
LED auxiliary lighting for enduros
Pair of universal fog lights, LED technology with black painted aluminum housing, with E11-EG approval Ø 21mm - 25mm- LED- technology guarantees low energy consumption, therefore suitable not only for large touring enduros, but also for small vehicles with weaker alternator.- Easy to mount on all crash bars with a tube diameter of 21mm to 25mm.- Delivery incl. fuse and cable for direct connection to the battery and a waterproof switch for mounting on the handlebar.- Additional cable for switching via the ignition lock included.- Power consumption of only 14 kW per spotlight.
Twinlight auxiliary headlight (high beam) for Moto Guzzi V7 Special/Stone/Centenario (21-24)
The HEPCO&BECKER Twinlights, high-gloss chrome-plated, with 2x55 watt light output guarantee an impressive appearance. They are not only a beautiful addition, but also offer a safety lock.Naturally TÜV-free and with type approval. Are switched instead of the normal high beam. Features: are switched instead of the normal high beam when the high beam is on, a maximum of two headlights may be lit on the motorcycle simple installation Scope of delivery: headlight set, model-specific bracket and mounting material (incl. bracket and cable) incl. ABE incl. bulb (halogen bulb H3 with flat plug connection, 55 watts)